Difference between revisions of "Building fully open climatic monitoring system"

From OSGeo
Jump to: navigation, search
(Participants)
m
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
 
= [https://wiki.osgeo.org/wiki/Open_Monitoring_Systems_Working_Group OSGeo's Open Monitoring System WG] hackathon =
 
= [https://wiki.osgeo.org/wiki/Open_Monitoring_Systems_Working_Group OSGeo's Open Monitoring System WG] hackathon =
  
This event will be held in Italy, in San Michele all'Adige at Fondazione Edmund Mach [http://osm.org/go/0Cvti3RZ9--?m= OSM]. The event is a workshop to learn how to create a open climatic monitoring system. The dates are '''6th and 7th December 2016'''.
+
This event was held in Italy, in San Michele all'Adige at Fondazione Edmund Mach [http://osm.org/go/0Cvti3RZ9--?m= OSM]. The event is a workshop to learn how to create a open climatic monitoring system. The dates are '''6th and 7th December 2016'''.
 +
 
 +
[[File:20161207 104958 FEM OSHW IstSOS.jpg|thumbnail|Hackaton in FEM]]
 +
 
  
 
== Program ==
 
== Program ==
Line 105: Line 108:
 
| 7 || Yann Chemin || 4th or 5th || 8th || Freelance ||  ||  
 
| 7 || Yann Chemin || 4th or 5th || 8th || Freelance ||  ||  
 
|-
 
|-
| 8 || Ilaria Ferrando || - || - || UNIGE ||  ||  
+
| 8 || <s>Ilaria Ferrando</s> || - || - || UNIGE ||  ||  
 
|-
 
|-
 
| 9 || Ivan Piffer || - || - || Fondazione E. Mach ||  ||  
 
| 9 || Ivan Piffer || - || - || Fondazione E. Mach ||  ||  

Latest revision as of 17:04, 7 December 2016

OSGeo's Open Monitoring System WG hackathon

This event was held in Italy, in San Michele all'Adige at Fondazione Edmund Mach OSM. The event is a workshop to learn how to create a open climatic monitoring system. The dates are 6th and 7th December 2016.

Hackaton in FEM


Program

Day 1

  • 09:00 Introduction, Open Software and Open Hardware (Talk)
  • 10:00 introduction to OGC Sensor Observation Service with istSOS (Talk)
  • 10:30 coffee break
  • 11:00 Arduino IDE: troubleshooting, compiling (Talk+hands-on)
   Download the IDE: https://www.arduino.cc/en/Main/Software
   Blink example (hands-on)
   //BLINK EXAMPLE, switch on and off the Arduino board LED
   void setup() { 
     pinMode(LED_BUILTIN, OUTPUT); // Will connect to the board LED
   }
   void loop() {
     digitalWrite(LED_BUILTIN, HIGH);   // turn the LED on (HIGH is the voltage level)
     delay(3000);                       // wait for 3 seconds
     digitalWrite(LED_BUILTIN, LOW);    // turn the LED off by making the voltage LOW
     delay(2000);                       // wait for 2 seconds
   }
  • 12:30 Lunch
  • 13.30 Arduino hands on: blink (cntd) and temperature, temperature and humidity, other sensors like CO2 (Hands on)
  • 14:00 Introduction to weather station (Talk)
   Each station consists of an Arduino microcontroller, 
   a weather shield, a GSM board, weather sensors, and 
   a micro-SD card. Access to the manuals for assembling, 
   maintaining and programming the stations can be found at: 
   http://www.iwmi.cgiar.org/resources/mobile-weather-stations/
   A similar Arduino-based station full-kit is found at:
   http://store.switchdoc.com/ourweather-complete-weather-kit/ 
  • 14:30 Discover weather station components (Hands on)
  • 15:00 coffee break
  • 15:30 Building weather station (Hands on)
  • 17:30 end

Day 2

  • 09:00 Soldering workshop (Hands on)
  • 10:00 Prototyping your own sensor system and introduce arduino enslaved to raspberrypi (Talk)
  • 10:30 coffee break
  • 11:00 Prototyping your own sensor system and introduce arduino enslaved to raspberrypi (Hands on)
   import serial,sys
   ser = serial.Serial("/dev/USB0", 9600)
   while 1:
       sys.stdout.write(ser.readline())
       sys.stdout.flush()
  • 12:30 Introduction about communication: GSM, Wifi, RF, USB (Talk)
  • 13:00 Lunch
  • 14:00 Connecting to istSOS for data management, analysis and distribution
  • 15:30 coffee break
  • 16:00 Connecting to istSOS for data management, analysis and distribution (cont.)
  • 17:00 end

Components to bring

To follow completely the hackathon everyone need to come with the following components

Required

Material:

  • arduino nano v3 with soldered pins
  • weather components:
  1. EITHER:
- Arduino Uno R3
- SparkFun Weather Shield DEV-12081
- Arduino Stackable Header Kit - R3PRT-11417
- GPS Receiver - GP-735 (56 Channel) GPS-13670
- JST SH Jumper 6 Wire - 1.75" GPS-00574
- RJ11 6-Pin Connector PRT-00132
  1. OR:
- OurWeather station complete kit
  • leds
  • some sensors (DS18B20 or DHT22 or gas)
  • some jumper wires/cable

Suggested

  • raspberry pi with raspbian OS
  • arduino nano v3 non soldered with separated headers
  • arduino shield for communication (GSM, Wifi, RF)
  • arduino data logger shield OpenLog (Banggood)
  • Weather Meters SEN-08942 (this come with OurWeather)
  • solder iron
  • soldering led

Participants

The maximum number of participant is 20 people.

Number Name Arrival date Departure date Affiliation Your own sensors Note
1 Luca Delucchi - - Fondazione E. Mach
2 Robero Zorer - - Fondazione E. Mach
3 Massimiliano Cannata - - SUPSI
4 Daniele Strigaro - - SUPSI
5 Milan Antonovic - - SUPSI
6 Mirko Cardoso - - SUPSI
7 Yann Chemin 4th or 5th 8th Freelance
8 Ilaria Ferrando - - UNIGE
9 Ivan Piffer - - Fondazione E. Mach
10 Francesca Cagnacci - - Fondazione E. Mach
11 Federico Ossi - - Fondazione E. Mach
12 Martina Costi - - Università di Trento
13 Clara Tattoni - - FEM/Unitn
14 Nikos Alexandris - - Freelancer
15 Antonio Galea - - Freelancer
16 Alessandro Stefani - -
17 Paolo Lenti - - Fondazione E. Mach
18 Sébastien Wenger - - -
ADD YOUR SELF

Sponsors