View source for Building fully open climatic monitoring system

= [https://wiki.osgeo.org/wiki/Open_Monitoring_Systems_Working_Group OSGeo's Open Monitoring System WG] hackathon =

This event will be held in Italy, in San Michele all'Adige at Fondazione Edmund Mach [http://osm.org/go/0Cvti3RZ9--?m= OSM]. The event is a workshop to learn how to create a open climatic monitoring system. The dates are '''6th and 7th December 2016'''.

== Program ==
=== Day 1 ===
* 09:00 Introduction, Open Software and Open Hardware (Talk)
* 10:00 introduction to OGC Sensor Observation Service with istSOS (Talk)
* 10:30 coffee break
* 11:00 Arduino hands on: blink and temperature, temperature and humidity, other sensors like CO2 (Hands on)
* 12:30 Lunch
* 13.30 Arduino IDE: troubleshooting, compiling (Talk+hands-on)
* 14:00 Introduction to weather station (Talk)
* 14:30 Discover weather station components (Hands on)
* 15:00 coffee break
* 15:30 Building weather station (Hands on)
* 17:30 end

=== Day 2 ===
* 09:00 Soldering workshop (Hands on)
* 10:00 Prototyping your own sensor system and introduce arduino enslaved to raspberrypi (Talk)
* 10:30 coffee break
* 11:00 Prototyping your own sensor system and introduce arduino enslaved to raspberrypi (Hands on)
* 12:30 Introduction about communication: GSM, Wifi, RF, USB (Talk)
* 13:00 Lunch
* 14:00 Connecting to istSOS for data management, analysis and distribution
* 15:30 coffee break
* 16:00 Connecting to istSOS for data management, analysis and distribution (cont.)
* 17:00 end

== Components to bring ==

To follow completely the hackathon everyone need to come with the following components

=== Required ===
Material:
* arduino nano v3 with soldered pins
* weather components:
# EITHER:
 - Arduino Uno R3
 - SparkFun Weather Shield DEV-12081
 - Arduino Stackable Header Kit - R3PRT-11417
 - GPS Receiver - GP-735 (56 Channel) GPS-13670
 - JST SH Jumper 6 Wire - 1.75" GPS-00574
 - RJ11 6-Pin Connector PRT-00132
# OR:
 - [http://www.switchdoc.com/ourweather/ OurWeather] station complete kit
* leds
* some sensors (DS18B20 or DHT22 or gas)
* some jumper wires/cable

=== Suggested ===
* raspberry pi with raspbian OS
* arduino nano v3 non soldered with separated headers
* arduino shield for communication (GSM, Wifi, RF)
* arduino data logger shield OpenLog ([http://www.banggood.com Banggood])
* Weather Meters SEN-08942 (this come with [http://www.switchdoc.com/ourweather/ OurWeather])
* solder iron
* soldering led

== Participants ==

The maximum number of participant is 20 people.

{| class="wikitable"
|-
! Number !! Name !! Arrival date !! Departure date !! Affiliation !! Your own sensors !! Note
|-
| 1 || Luca Delucchi || - || - || Fondazione E. Mach || || 
|-
| 2 || Robero Zorer || - || - || Fondazione E. Mach ||  || 
|-
| 3 || Massimiliano Cannata || - || - || SUPSI ||  || 
|-
| 4 || Daniele Strigaro || - || - || SUPSI ||  || 
|-
| 5 || Milan Antonovic || - || - || SUPSI ||  || 
|-
| 6 || Mirko Cardoso || - || - || SUPSI ||  || 
|-
| 7 || Yann Chemin || - || - || Freelance ||  || 
|-
| 8 || Ilaria Ferrando || - || - || UNIGE ||  || 
|-
| 9 || Ivan Piffer || - || - || Fondazione E. Mach ||  || 
|-
| 10 || Francesca Cagnacci || - || - || Fondazione E. Mach ||  || 
|-
| 11 || Federico Ossi || - || - || Fondazione E. Mach ||  || 
|-
| 12 || Martina Costi|| - || - || Università di Trento ||  || 
|-
| 13 || Clara Tattoni|| - || - || FEM/Unitn ||  || 
|-
| 14 || Nikos Alexandris|| - || - || Freelancer || ||
|-
| 15 || Antonio Galea || - || - || Freelancer || ||
|-
| 16 || Alessandro Stefani || - || - ||  || ||
|-
| 17 || Paolo Lenti || - || - || Fondazione E. Mach || ||
|-
| 18 || Sébastien Wenger || - || - || - || ||
|-
| || ADD || YOUR || SELF ||  || ||
|}

== Sponsors ==
* [http://www.fmach.it Fondazione Edmund Mach], providing logistic support and organization effort