SAC:Backups

Backups

backup.osgeo.org

This was the OSUOSL VM used for backups starting in 2010/04 and is now upgraded to dedicated hardware (very) early in 2014. It is used for Bacula backups of OSU OSL VMs and Rsync backups of the public space at "download.osgeo.org".

• Admins: Frank Warmerdam (rsync), Martin Spott (backula)
• access is via SAC shell group.
• download.osgeo.org rsync mirroring runs nightly and is externally available at download2.osgeo.org.
• /backup/bacula/ contains the Bacula storage device
• /backup/rsync/ is for rsync backups
• /backup/longterm/ is for long term backups of static material (ie conference web sites)
• /backup/pgdump/ contains PostgreSQL dumps of the Bacula director database

OS installation

• Create an empty partition at the beginning of every hard drive, use "Reserved BIOS boot area" on GPT-partitioned disks (typical with 2 GByte disks or bigger) or just "Unused" on DOS-type partition tables. By tradition I reserve 10 MByte on each disk, maybe 1 MByte would be sufficient as well, but these 9 MByte of difference don't cost that much and you're on the safe side ....
• Create a second partition on every disk - for use by MD - allocating all the remaining disk space
• Create an MD RAID5 over all the 'second' partitions for use by LVM
• Create a LVM volume group on top of the MD physical volume
• Create volumes "boot" (256 MByte, Ext2, /boot/), "root" (20 GByte, XFS, /root/), "swap" (8 GByte), "var" (20 GByte, XFS, /var/)
• Install the base operating system, don't forget to set up SSH ;-)
• Add volumes "backup" (2 TByte, XFS, /backup/), "mirror" (1 TByte, XFS, /mirror/)

Bacula

Configuration as of June, 2011

A Full copy is made every Sat. with incremental backups nightly.

This consists of the following directories:

   File = /boot
   File = /etc
   File = /var/www
   File = /osgeo
   File = /var/lib/mysql
   File = /var/lib/postgresql
   File = /var/lib/dpkg
   File = /var/lib/aptitude/pkgstates

From each of the following machines:

• wiki,secure,web,webextra,backup,qgis,projects,adhoc

Trac currently gets trac_backup.zip which is generated during the daily backup cycle

Administration

General configuration is managed in /etc/bacula/bacula-dir.conf.

To review the backups and perform a restore you can use the bconsole application:

 sudo bconsole

Specific configuration of the file/tape storage is in the Storage director /etc/bacula/bacula-sd.conf

• Bacula uses the hard drive as a series of Tape drives.
• Each Volume is a predetermined size (~500MB currently), when a volume fills bacula makes the next one.
• Volumes older than a certain date or when volume increments have reach a configured maximum can be recycled into the available disk pool.

Recovery

• If you use bconsole to recover data bacula does the work of finding the files you want and pulling them out of the various volumes.
• Directory for recovered files is set in the bacula-dir.conf under:

Job {
 Name = "RestoreFiles"
 Type = Restore
 Client = backup.osgeo.osuosl.org-fd
 FileSet = "Full Set"
 Storage = File
 Pool = Default
 Messages = Standard
 Where = /tmp/bacula-restores
}

• Directions for how to restore

sudo bconsole
*restore

Then follow the prompts, using the above linked guide to help find the files you want.

osgeo1 (primary peer1 host)

current cron jobs for backups

/etc/cron.d/backup.cron

#### Backup cron jobs 
# min hour day month dayofweek user command
#
# 2am: Daily rsync to /home/back
05 2 * * * root /root/scripts/daily.sh
# Every 3 hours 
# /etc/mysql-zrm
#33 */3 * * * root /usr/bin/rsync -a --delete /etc/mysql-zrm/ /home/back/etc/mysql-zrm/
# /var/lib/mysql-zrm
#34 */3 * * * root /usr/bin/rsync -a --delete /var/lib/mysql-zrm/ /home/back/mysql-zrm/
# call backup_trac_svn.sh to backup 
# subversion /var/www/svn/repos
# trac /var/www/trac
45 */3 * * * root /root/scripts/backup_svn_incremental.sh
#45 */3 * * * root /root/scripts/trac_backup.pl
#45 */3 * * * root /root/scripts/backup_trac_svn.sh
# Thisdoes some hourly drupal/mysql optimization
39 * * * * root /root/scripts/drupal_cron.sh

backup script are in /root/scripts

osgeo3 & osgeo4

See: Infrastructure Transition Plan 2010

download.osgeo.org

As noted in Download Server the contents of download.osgeo.org are rsync'ed to osgeo2.

ProjectsVM

Bacula - we need details.

??? How does it work?

svn.osgeo.org

As noted in Subversion the subversion repository is mirrored using svn mirroring and does not need to be backed up otherwise.