Difference between revisions of "SAC:Backups"

From OSGeo
Jump to navigation Jump to search
(→‎Backups: hardware notes)
(→‎OS installation: formatting for readability)
Line 44: Line 44:
 
* Create an empty partition at the beginning of every hard drive, use "Reserved BIOS boot area" on GPT-partitioned disks (typical with 2 GByte disks or bigger) or just "Unused" on DOS-type partition tables. By tradition I reserve 10 MByte on each disk, maybe 1 MByte would be sufficient as well, but these 9 MByte of difference don't cost that much and you're on the safe side ....
 
* Create an empty partition at the beginning of every hard drive, use "Reserved BIOS boot area" on GPT-partitioned disks (typical with 2 GByte disks or bigger) or just "Unused" on DOS-type partition tables. By tradition I reserve 10 MByte on each disk, maybe 1 MByte would be sufficient as well, but these 9 MByte of difference don't cost that much and you're on the safe side ....
 
* Create a second partition on every disk - for use by MD - allocating all the remaining disk space
 
* Create a second partition on every disk - for use by MD - allocating all the remaining disk space
* Create an MD RAID5 over all the 'second' partitions for use by LVM
+
* MD RAID5 over all the 'second' partitions for use by LVM - '''8 TB''' usable space
* Create a LVM volume group on top of the MD physical volume
+
* LVM volume group on top of the MD physical volume
* Create volumes "boot" (256 MByte, Ext2, /boot/), "root" (20 GByte, XFS, /root/), "swap" (8 GByte), "var" (20 GByte, XFS, /var/)
+
* Volumes
 +
** "boot" (256 MByte, Ext2, /boot/),  
 +
** "root" (20 GByte, XFS, /root/),  
 +
** "swap" (8 GByte),  
 +
** "var" (20 GByte, XFS, /var/)
 
* Install the base operating system, don't forget to set up SSH  ;-)
 
* Install the base operating system, don't forget to set up SSH  ;-)
* Add volumes "backup" (2 TByte, XFS, /backup/), "mirror" (1 TByte, XFS, /mirror/)
+
* Volumes
 +
** "backup" (2 TByte, XFS, /backup/),  
 +
** "mirror" (1 TByte, XFS, /mirror/)
  
 
=== Bacula ===
 
=== Bacula ===

Revision as of 15:06, 15 April 2019

Backups

backup.osgeo.org (aka osgeo5, mirror)

This was the OSUOSL VM used for backups starting in 2010/04 and is now upgraded to dedicated hardware (very) early in 2014. It is used for Bacula backups of OSU OSL VMs and Rsync backups of the public space at "download.osgeo.org".

  • Admins: Frank Warmerdam (rsync), Martin Spott (bacula), Sandro Santilli (bacula)
  • access is via SAC shell group.
  • download.osgeo.org rsync mirroring runs nightly and is externally available at download2.osgeo.org.
  • /backup/bacula/ contains the Bacula storage device
  • /backup/rsync/ is for rsync backups
  • /backup/longterm/ is for long term backups of static material (ie conference web sites)
  • /backup/pgdump/ contains PostgreSQL dumps of the Bacula director database
  • /etc/bacula contains Bacula configuration, is under local git repo

Hardware

CPU: Intel Xeon E3-1220v2, 3.1GHz (4-Core, 8MB Cache, 69W) 22nm
RAM: 16GB (2 x 8GB DDR3-1600 ECC Unbuffered 2R DIMMs) Operating at 1600 MT/s Max
NIC: Two Gigabit Ethernet Controllers (Intel 82574L) - Integrated
Management: Integrated IPMI 2.0 & KVM with Dedicated LAN
Controller: 2 Ports 6Gb/s SATA, and 4 Ports 3Gb/s SATA via Intel C216 Chipset
PCIe 3.0 x16: No Item Selected
PCIe 2.0 x4 (x8): No Item Selected
NOTE: Drives will be connected to onboard SATA controller unless otherwise specified
Hot-Swap Drive - 1: 3TB Seagate Constellation ES.3 (6Gb/s, 7.2K RPM, 128MB Cache) 3.5-inch SATA
Hot-Swap Drive - 2: 3TB Seagate Constellation ES.3 (6Gb/s, 7.2K RPM, 128MB Cache) 3.5-inch SATA
Hot-Swap Drive - 3: 3TB Seagate Constellation ES.3 (6Gb/s, 7.2K RPM, 128MB Cache) 3.5-inch SATA
Hot-Swap Drive - 4: 3TB Seagate Constellation ES.3 (6Gb/s, 7.2K RPM, 128MB Cache) 3.5-inch SATA
Optical Drive: Blanking Panel, No Optical Drive
Front Input: Blanking Panel - No Front Inputs
Power Supply: Redundant 500W Power Supply with PMBus - 80 PLUS Platinum Certified
Rail Kit: 1U Sliding Rail Kit
OS: No Item Selected
Warranty: Standard 3-Year Warranty
Notes:
New quote with redundant power supply. Can I get a 2.5 inch spinning
disk instead of SSD in the Front Input slot (500 GB Seagate
Constellation 6 GB/s 2.5")?

OS installation

  • Create an empty partition at the beginning of every hard drive, use "Reserved BIOS boot area" on GPT-partitioned disks (typical with 2 GByte disks or bigger) or just "Unused" on DOS-type partition tables. By tradition I reserve 10 MByte on each disk, maybe 1 MByte would be sufficient as well, but these 9 MByte of difference don't cost that much and you're on the safe side ....
  • Create a second partition on every disk - for use by MD - allocating all the remaining disk space
  • MD RAID5 over all the 'second' partitions for use by LVM - 8 TB usable space
  • LVM volume group on top of the MD physical volume
  • Volumes
    • "boot" (256 MByte, Ext2, /boot/),
    • "root" (20 GByte, XFS, /root/),
    • "swap" (8 GByte),
    • "var" (20 GByte, XFS, /var/)
  • Install the base operating system, don't forget to set up SSH ;-)
  • Volumes
    • "backup" (2 TByte, XFS, /backup/),
    • "mirror" (1 TByte, XFS, /mirror/)

Bacula

See SAC:Bacula

osgeo1 (primary peer1 host)

current cron jobs for backups

/etc/cron.d/backup.cron

#### Backup cron jobs 
# min hour day month dayofweek user command
#
# 2am: Daily rsync to /home/back
05 2 * * * root /root/scripts/daily.sh
# Every 3 hours 
# /etc/mysql-zrm
#33 */3 * * * root /usr/bin/rsync -a --delete /etc/mysql-zrm/ /home/back/etc/mysql-zrm/
# /var/lib/mysql-zrm
#34 */3 * * * root /usr/bin/rsync -a --delete /var/lib/mysql-zrm/ /home/back/mysql-zrm/
# call backup_trac_svn.sh to backup 
# subversion /var/www/svn/repos
# trac /var/www/trac
45 */3 * * * root /root/scripts/backup_svn_incremental.sh
#45 */3 * * * root /root/scripts/trac_backup.pl
#45 */3 * * * root /root/scripts/backup_trac_svn.sh
# Thisdoes some hourly drupal/mysql optimization
39 * * * * root /root/scripts/drupal_cron.sh

backup script are in /root/scripts

osgeo3 & osgeo4

See: Infrastructure Transition Plan 2010

download.osgeo.org

As noted in Download Server the contents of download.osgeo.org are rsync'ed to osgeo2.

ProjectsVM

Bacula - we need details.

??? How does it work?

svn.osgeo.org

As noted in Subversion the subversion repository is mirrored using svn mirroring and does not need to be backed up otherwise.