Building Mapguide on Ubuntu 7.10 Server

From OSGeo
Revision as of 16:46, 2 September 2008 by Wiki-Mwtoews (talk | contribs) (update to exact apperance in file)
Jump to navigation Jump to search

Below are instructions that will aid a user with installing FDO 3.3 and MapGuide Open Source 2.0 from SVN trunk on Ubuntu 7.10 (Gutsy Gibbon) Server. It is based on previous instructions, lots of credit to their authors!

NOTES

By the time you read this, FDO 3.3 and MapGuide 2.0 may have their own branches in SVN. If so, just swap out references to /trunk/ with the appropriate /branch/* where necessary.

The default directory used in these instructions is called /home/administrator. This assumes that you create your primary user account with the name "administrator". If you do not, mentally adjust where necessary.

You may want to consider using a client like PuTTY to access your server's terminal via openssh-server from a different computer. This really helps with copying and pasting. If so, either ensure that you install the OpenSSH server during your basic install, or add "openssh-server" to the list of packages below.

Any time that you run a task and pipe its output to a logfile, make sure that you look at the end of the logfile when you're done to make sure that it completed successfully. If it didn't then you have the logfile to post an error report from... Here's an example of how to do this: 

tail -n 30 mylogfile.log

BASIC SETUP

Install a basic Ubuntu Server 7.10 (Gutsy Gibbon). Once this is complete, you will have to add some extra packages to compile MapGuide. Make sure that you get all of these packages; the line is really long: 

sudo apt-get install build-essential bison flex automake1.7 automake1.9 libtool doxygen subversion libjpeg62-dev libpng12-dev libfreetype6-dev libexpat1-dev libxalan110-dev libxslt1-dev expat libcurl4-openssl-dev libasound2-Dev python2.5-dev sun-java5-jdk

If Java fails to install, you may need to edit /etc/apt/sources.list to uncomment the multiverse repository lines and then try installing it again.

To avoid "bad fd number" errors, type the following in the terminal: 

sudo dpkg-reconfigure dash

and choose No at the prompt. Be aware that this changes your default /bin/sh from dash back to bash.

Prepare your SVN profile to use the appropriate options for FDO and MapGuide. Type the following at the Terminal.

(this just sets up your initial .subversion settings folder) 

svn info http://svn.osgeo.org/fdo

(edit ~/.subversion/config) 

nano .subversion/config

You can enable options by removing the comments (# ) in front of them, or just add new lines to the appropriate locations.

In the Miscellany section, enable: 

use-commit-times = yes
enable-auto-props = yes

In the Auto-Props section, add: 

*.*=svn:eol-style=native
*.sh=svn:executable

Save and close the config file.

Set the SUN Java to be the default Java installation: 

sudo update-java-alternatives -s java-1.5.0-sun

Edit /etc/jvm, moving "/usr/lib/jvm/java-1.5.0-sun" to the top of the list 

sudo nano /etc/jvm

Edit /etc/environment so that services will know where to look for Java 

sudo nano /etc/environment

(Add the following line) 

JAVA_HOME="/usr/lib/jvm/java-1.5.0-sun"

Log off and then log back on so that these settings take effect. Alternatively, export JAVA_HOME in your current session.

FDO INSTALL

In terminal type the following: 

mkdir fdosvn

(be prepared to wait a long time for this command to complete, the test data takes a while to download) 

svn checkout http://svn.osgeo.org/fdo/trunk fdosvn

(type in your password after the following command if prompted) 

sudo mkdir /usr/local/fdo-3.3.0

(if you are not logged in as administrator, you change the userid below!) 

sudo chown administrator /usr/local/fdo-3.3.0

cd fdosvn

source ./setenvironment.sh

In terminal, type the following to run the builds. Note, there will be no output from either command until completion as it is all being spooled to nohup.out. You can log into another terminal session and tail this file if you start getting antsy :-) 

nohup ./build_thirdparty.sh > build_thirdparty.log

nohup ./build_linux.sh > build_linux.log

APACHE / PHP INSTALL

In Terminal type the following: 

cd ~

(you should now be in /home/administrator, or whatever your $HOME is) 

mkdir mgsvn

svn checkout http://svn.osgeo.org/mapguide/trunk/MgDev/ mgsvn

sudo mkdir /usr/local/mapguideopensource

(replace administrator with your userid if necessary) 

sudo chown administrator /usr/local/mapguideopensource

cd mgsvn/Oem/LinuxApt

(careful when copying and pasting this line, the - got changed into . for me) 

find . -name "*.gz" -exec tar xzf {} \;

nohup ./build_apt.sh > ../../build_apt.log

BUILD OEM

Perform the following: 

cd ~/mgsvn/

nohup ./build_oem.sh > build_oem.log

BUILD MAPGUIDE

Go for the gusto: 

aclocal
libtoolize --force
automake --add-missing --copy
autoconf

./configure --enable-optimized

nohup make > make_mapguide.log

nohup make install > install_mapguide.log


STARTUP OPTIONS

While you're testing, it can be convenient to run services interactively, but eventually you'll want them to shut down / restart when you the computer is rebooted. This section gives you both options.

START SERVICES MANUALLY

Start Apache 

sudo /usr/local/mapguideopensource/webserverextensions/apache2/bin/apachectl restart

Stop Apache 

sudo /usr/local/mapguideopensource/webserverextensions/apache2/bin/apachectl stop

Start MapGuide 

sudo /usr/local/mapguideopensource/server/bin/mgserverd.sh

Stop MapGuide 

sudo pkill -f -u root "mgserver daemon"

SET SERVICES TO AUTO-START

!!! Warning, this is not working. See Ticket #309 !!!

Add Apache's control script into the system init structure: 

sudo ln -s /usr/local/mapguideopensource/webserverextensions/apache2/bin/apachectl /etc/init.d/apache-mapguide

Set up some default run level actions for Apache (basically, start on interactive, stop on shutdown/restart) 

sudo update-rc.d apache-mapguide defaults 30 70

Create a startup script for Mapguide server: 

touch /usr/local/mapguideopensource/mapguidectl
chmod u=rwx,go=r /usr/local/mapguideopensource/mapguidectl
nano /usr/local/mapguideopensource/mapguidectl

Add the following contents: 

#!/bin/sh
# MapGuide init script
. /lib/lsb/init-functions
case "$1" in
 start)
   log_daemon_msg "Starting MapGuide Server 2.0.0..."
   export GDAL_DATA=/usr/local/mapguideopensource/server/bin/data
   export PROJ_LIB=/usr/local/mapguideopensource/server/bin/nad
   export LD_LIBRARY_PATH=/usr/local/fdo-3.3.0/lib:"$LD_LIBRARY_PATH"
   pushd /usr/local/mapguideopensource/server/bin > /dev/null
   ./mgserver daemon > /dev/null
   popd > /dev/null
   log_end_msg 0
   ;;
 stop)
   log_daemon_msg "Stopping MapGuide Server 2.0.0..."
   MGPROCESS=`/usr/bin/pgrep -f -u root "mgserver daemon"`
   if [ "$MGPROCESS" != "" ]
   then
     /bin/kill $MGPROCESS
   fi
   log_end_msg 0
   ;;
 *)
   echo "Usage: $0 {start|stop}"
   exit 1
   ;;
esac
exit 0

Add MapGuide's control script into the system init structure: 

sudo ln -s /usr/local/mapguideopensource/mapguidectl /etc/init.d/mapguide

Set up some default run level actions for MapGuide (basically, start on interactive, stop on shutdown/restart) 

sudo update-rc.d mapguide defaults 35 65

Restart and see if it works!

Retrieved from "http://wiki.osgeo.org/w/index.php?title=Building_Mapguide_on_Ubuntu_7.10_Server&oldid=28506"