Jammy python notes
IPython3
ipython3 Python 3.10.4 (main, Jun 29 2022, 12:14:53) [GCC 11.2.0] Type 'copyright', 'credits' or 'license' for more information IPython 7.31.1 -- An enhanced Interactive Python. Type '?' for help.
ipython3 | Unpacking python3-backcall (0.2.0-2) ... | -parso (0.8.1-1) ... | -jedi (0.18.0-1) ... | -traitlets (5.1.1-1) ... | -matplotlib-inline (0.1.3-1) ... | -pickleshare (0.7.5-5) ... | -wcwidth (0.2.5+dfsg1-1) ... | -prompt-toolkit (3.0.28-1) ... | ipython3 (7.31.1-1) ...
Python3 Pandas
python3-pandas | -matplotlib (3.5.1-2build1) ... | -numba (0.55.1-0ubuntu2) ... | -pandas-lib:amd64 (1.3.5+dfsg-3) ... | -pandas (1.3.5+dfsg-3) ... | -setuptools (59.6.0-1.2) ... | -wheel (0.37.1-2) ... | -pip (22.0.2+dfsg-1) ... | -pluggy (0.13.0-7.1) ... | -py (1.10.0-1) ... | -toml (0.10.2-1) ... | -pytest (6.2.5-1ubuntu2) ... | -tables-lib (3.7.0-2build1) ... | -tables (3.7.0-2build1) ... | -numexpr (2.8.1-1build1) ... | -openpyxl (3.0.9-1) ... | -xlwt (1.3.0-3) ... | -scipy (1.8.0-1)
mjam@x10jam:~/srcs_mjam$ sudo apt install python3-pandas Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: blt fonts-font-awesome fonts-lato fonts-lyx libboost-dev libboost1.74-dev libclang-cpp11 libexpat1-dev libjs-jquery-ui libjs-sphinxdoc libjs-underscore liblbfgsb0 libllvm11 libopenblas-dev libopenblas-pthread-dev libopenblas0 libopenblas0-pthread libpython3-dev libpython3.10-dev libtbb12 libtbbmalloc2 libtk8.6 libxsimd-dev llvm-11 llvm-11-dev llvm-11-linker-tools llvm-11-runtime llvm-11-tools numba-doc python-babel-localedata python-matplotlib-data python-odf-doc python-odf-tools python-tables-data python3-appdirs python3-attr python3-babel python3-beniget python3-bottleneck python3-brotli python3-bs4 python3-cycler python3-dateutil python3-decorator python3-defusedxml python3-dev python3-et-xmlfile python3-fonttools python3-fs python3-gast python3-html5lib python3-iniconfig python3-jdcal python3-jinja2 python3-kiwisolver python3-llvmlite python3-lxml python3-lz4 python3-markupsafe python3-matplotlib python3-mpmath python3-numba python3-numexpr python3-odf python3-openpyxl python3-packaging python3-pandas-lib python3-pil.imagetk python3-pip python3-pluggy python3-ply python3-py python3-pytest python3-pythran python3-scipy python3-setuptools python3-soupsieve python3-sympy python3-tables python3-tables-lib python3-tk python3-toml python3-tz python3-ufolib2 python3-unicodedata2 python3-webencodings python3-wheel python3-xlwt python3.10-dev sphinx-rtd-theme-common tk8.6-blt2.5 unicode-data zlib1g-dev Suggested packages: blt-demo libboost-doc libboost1.74-doc libboost-atomic1.74-dev libboost-chrono1.74-dev libboost-container1.74-dev libboost-context1.74-dev libboost-contract1.74-dev libboost-coroutine1.74-dev libboost-date-time1.74-dev libboost-exception1.74-dev libboost-fiber1.74-dev libboost-filesystem1.74-dev libboost-graph1.74-dev libboost-graph-parallel1.74-dev libboost-iostreams1.74-dev libboost-locale1.74-dev libboost-log1.74-dev libboost-math1.74-dev libboost-mpi1.74-dev libboost-mpi-python1.74-dev libboost-numpy1.74-dev libboost-program-options1.74-dev libboost-python1.74-dev libboost-random1.74-dev libboost-regex1.74-dev libboost-serialization1.74-dev libboost-stacktrace1.74-dev libboost-system1.74-dev libboost-test1.74-dev libboost-thread1.74-dev libboost-timer1.74-dev libboost-type-erasure1.74-dev libboost-wave1.74-dev libboost1.74-tools-dev libmpfrc++-dev libntl-dev libboost-nowide1.74-dev libjs-jquery-ui-docs tk8.6 libxsimd-doc llvm-11-doc python-attr-doc python-bottleneck-doc python-cycler-doc python3-genshi python-jinja2-doc llvmlite-doc python-lxml-doc dvipng ffmpeg fonts-staypuft inkscape ipython3 python-matplotlib-doc python3-cairocffi python3-gobject python3-sip python3-tornado texlive-extra-utils texlive-latex-extra python-mpmath-doc python3-gmpy2 nvidia-cuda-toolkit python-pandas-doc python3-statsmodels python-pil-doc python-ply-doc subversion python-scipy-doc python-setuptools-doc texlive-fonts-extra python-sympy-doc python3-netcdf4 python-tables-doc vitables tix python3-tk-dbg python3-xlrd python-xlrt-doc The following NEW packages will be installed: blt fonts-font-awesome fonts-lato fonts-lyx libboost-dev libboost1.74-dev libclang-cpp11 libexpat1-dev libjs-jquery-ui libjs-sphinxdoc libjs-underscore liblbfgsb0 libllvm11 libopenblas-dev libopenblas-pthread-dev libopenblas0 libopenblas0-pthread libpython3-dev libpython3.10-dev libtbb12 libtbbmalloc2 libtk8.6 libxsimd-dev llvm-11 llvm-11-dev llvm-11-linker-tools llvm-11-runtime llvm-11-tools numba-doc python-babel-localedata python-matplotlib-data python-odf-doc python-odf-tools python-tables-data python3-appdirs python3-attr python3-babel python3-beniget python3-bottleneck python3-brotli python3-bs4 python3-cycler python3-dateutil python3-decorator python3-defusedxml python3-dev python3-et-xmlfile python3-fonttools python3-fs python3-gast python3-html5lib python3-iniconfig python3-jdcal python3-jinja2 python3-kiwisolver python3-llvmlite python3-lxml python3-lz4 python3-markupsafe python3-matplotlib python3-mpmath python3-numba python3-numexpr python3-odf python3-openpyxl python3-packaging python3-pandas python3-pandas-lib python3-pil.imagetk python3-pip python3-pluggy python3-ply python3-py python3-pytest python3-pythran python3-scipy python3-setuptools python3-soupsieve python3-sympy python3-tables python3-tables-lib python3-tk python3-toml python3-tz python3-ufolib2 python3-unicodedata2 python3-webencodings python3-wheel python3-xlwt python3.10-dev sphinx-rtd-theme-common tk8.6-blt2.5 unicode-data zlib1g-dev 0 upgraded, 94 newly installed, 0 to remove and 4 not upgraded. Need to get 162 MB of archives. After this operation, 970 MB of additional disk space will be used. Do you want to continue? [Y/n] ... Get:94 http://mirrors.wikimedia.org/ubuntu jammy/universe amd64 python3-xlwt all 1.3.0-3 [83.7 kB] Fetched 162 MB in 7min 40s (353 kB/s) Extracting templates from packages: 100% Selecting previously unselected package fonts-lato. (Reading database ... 313418 files and directories currently installed.) ... Setting up python3-iniconfig (1.1.1-2) ... Setting up libtbbmalloc2:amd64 (2021.5.0-7ubuntu2) ... Setting up python3-attr (21.2.0-1) ... Setting up libboost1.74-dev:amd64 (1.74.0-14ubuntu3) ... Setting up fonts-lato (2.0-2.1) ... Setting up libopenblas0-pthread:amd64 (0.3.20+ds-1) ... update-alternatives: using /usr/lib/x86_64-linux-gnu/openblas-pthread/libblas.so.3 to provide /usr/lib/x86_64-linux-gnu/libblas.so.3 (libblas.so.3-x86_64-linux-gnu) in auto mode update-alternatives: using /usr/lib/x86_64-linux-gnu/openblas-pthread/liblapack.so.3 to provide /usr/lib/x86_64-linux-gnu/liblapack.so.3 (liblapack.so.3-x86_64-linux-gnu) in auto mode update-alternatives: using /usr/lib/x86_64-linux-gnu/openblas-pthread/libopenblas.so.0 to provide /usr/lib/x86_64-linux-gnu/libopenblas.so.0 (libopenblas.so.0-x86_64-linux-gnu) in auto mode Setting up python3-setuptools (59.6.0-1.2) ... Setting up python3-py (1.10.0-1) ... Setting up python3-jdcal (1.0-1.3) ... Setting up python3-lz4 (3.1.3+dfsg-1build3) ... Setting up python3-defusedxml (0.7.1-1) ... Setting up llvm-11-tools (1:11.1.0-6) ... Setting up python3-tables-lib (3.7.0-2build1) ... Setting up python3-unicodedata2 (14.0.0+ds-8) ... Setting up fonts-lyx (2.3.6-1) ... Setting up libtk8.6:amd64 (8.6.12-1build1) ... Setting up python3-pandas-lib:amd64 (1.3.5+dfsg-3) ... Setting up python3-ply (3.11-5) ... Setting up python3-gast (0.5.2-2) ... Setting up libtbb12:amd64 (2021.5.0-7ubuntu2) ... Setting up python3-markupsafe (2.0.1-2build1) ... Setting up python3-wheel (0.37.1-2) ... Setting up python3-webencodings (0.5.1-4) ... Setting up python3-tz (2022.1-1) ... Setting up python-babel-localedata (2.8.0+dfsg.1-7) ... Setting up unicode-data (14.0.0-1.1) ... Setting up python3-beniget (0.4.1-2) ... Setting up libxsimd-dev:amd64 (7.6.0-2) ... Setting up python3-decorator (4.4.2-0ubuntu1) ... Setting up python3-packaging (21.3-1) ... Setting up libllvm11:amd64 (1:11.1.0-6) ... Setting up libjs-jquery-ui (1.13.1+dfsg-1) ... Setting up libexpat1-dev:amd64 (2.4.7-1) ... Setting up python3-brotli (1.0.9-2build6) ... Setting up python3-cycler (0.11.0-1) ... Setting up python-odf-doc (1.4.2-1) ... Setting up python3-kiwisolver (1.3.2-1build1) ... Setting up python3-xlwt (1.3.0-3) ... Setting up python3-bottleneck (1.3.2+ds1-2build1) ... Setting up python3-numexpr (2.8.1-1build1) ... Setting up python3-pip (22.0.2+dfsg-1) ... Setting up python3-html5lib (1.1-3) ... Setting up python3-toml (0.10.2-1) ... Setting up python3-pluggy (0.13.0-7.1) ... Setting up llvm-11-linker-tools (1:11.1.0-6) ... Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9) ... Setting up libopenblas0:amd64 (0.3.20+ds-1) ... Setting up python3-lxml:amd64 (4.8.0-1build1) ... Setting up python3-et-xmlfile (1.0.1-2.1) ... Setting up python3-dateutil (2.8.1-6) ... Setting up libboost-dev:amd64 (1.74.0.3ubuntu7) ... Setting up python3-mpmath (1.2.1-2) ... Setting up python-matplotlib-data (3.5.1-2build1) ... Setting up python3-appdirs (1.4.4-2) ... Setting up python3-soupsieve (2.3.1-1) ... Setting up python-tables-data (3.7.0-2build1) ... Setting up fonts-font-awesome (5.0.10+really4.7.0~dfsg-4.1) ... Setting up sphinx-rtd-theme-common (1.0.0+dfsg-1) ... Setting up libjs-underscore (1.13.2~dfsg-2) ... Setting up liblbfgsb0:amd64 (3.0+dfsg.3-10) ... Setting up python3-odf (1.4.2-1) ... Setting up libopenblas-pthread-dev:amd64 (0.3.20+ds-1) ... update-alternatives: using /usr/lib/x86_64-linux-gnu/openblas-pthread/libblas.so to provide /usr/lib/x86_64-linux-gnu/libblas.so (libblas.so-x86_64-linux-gnu) in auto mode update-alternatives: using /usr/lib/x86_64-linux-gnu/openblas-pthread/liblapack.so to provide /usr/lib/x86_64-linux-gnu/liblapack.so (liblapack.so-x86_64-linux-gnu) in auto mode update-alternatives: using /usr/lib/x86_64-linux-gnu/openblas-pthread/libopenblas.so to provide /usr/lib/x86_64-linux-gnu/libopenblas.so (libopenblas.so-x86_64-linux-gnu) in auto mode Setting up python3-sympy (1.9-1) ... Setting up tk8.6-blt2.5 (2.5.3+dfsg-4.1build2) ... Setting up llvm-11-runtime (1:11.1.0-6) ... Setting up python3-babel (2.8.0+dfsg.1-7) ... update-alternatives: using /usr/bin/pybabel-python3 to provide /usr/bin/pybabel (pybabel) in auto mode Setting up python3-pytest (6.2.5-1ubuntu2) ... Setting up blt (2.5.3+dfsg-4.1build2) ... Setting up python-odf-tools (1.4.2-1) ... Setting up llvm-11 (1:11.1.0-6) ... Setting up python3-tk:amd64 (3.10.4-0ubuntu1) ... Setting up python3-tables (3.7.0-2build1) ... Setting up python3-bs4 (4.10.0-2) ... Setting up python3-fs (2.4.12-1) ... Setting up libclang-cpp11 (1:11.1.0-6) ... Setting up python3-llvmlite (0.38.0-1) ... Setting up libopenblas-dev:amd64 (0.3.20+ds-1) ... Setting up python3-jinja2 (3.0.3-1) ... Setting up python3-pandas (1.3.5+dfsg-3) ... Setting up python3-pil.imagetk:amd64 (9.0.1-1build1) ... Setting up python3-openpyxl (3.0.9-1) ... Setting up libpython3.10-dev:amd64 (3.10.4-3) ... Setting up libjs-sphinxdoc (4.3.2-1) ... Setting up python3.10-dev (3.10.4-3) ... Setting up numba-doc (0.55.1-0ubuntu2) ... Setting up libpython3-dev:amd64 (3.10.4-0ubuntu2) ... Setting up llvm-11-dev (1:11.1.0-6) ... Setting up python3-dev (3.10.4-0ubuntu2) ... Setting up python3-pythran (0.10.0+ds2-1) ... Setting up python3-scipy (1.8.0-1exp2ubuntu1) ... Setting up python3-numba (0.55.1-0ubuntu2) ... update-alternatives: using /usr/share/python3-numba/numba to provide /usr/bin/numba (numba) in auto mode Setting up python3-fonttools (4.29.1-2build1) ... Setting up python3-ufolib2 (0.13.1+dfsg1-1) ... Setting up python3-matplotlib (3.5.1-2build1) ... Processing triggers for libc-bin (2.35-0ubuntu3) ... Processing triggers for man-db (2.10.2-1) ... Processing triggers for fontconfig (2.13.1-4.2ubuntu5) ...
Python3 GeoPandas
python3-geopandas | libspatialindex6:amd64 (1.9.3-2) ... | libspatialindex-c6:amd64 (1.9.3-2) ... | pkg-config (0.29.2-1ubuntu3) ... | -click-plugins (1.1.1-3) ... | -cligj (0.7.2-1) ... | -descartes (1.1.0-4) ... | -munch (2.5.0-1) ... | -fiona (1.8.21-1build1) ... | -geographiclib (1.52-1) ... | -pyproj (3.3.0-2build1) ... | -shapely (1.8.0-1build1) ... | -geopandas (0.10.2-1) ... | -geopy (2.2.0-1) ... | libspatialindex-dev:amd64 (1.9.3-2) ... | -rtree (0.9.7-1) ...
mjam@x10jam:~/srcs_mjam$ sudo apt install python3-geopandas Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: libspatialindex-c6 libspatialindex-dev libspatialindex6 pkg-config python3-click-plugins python3-cligj python3-descartes python3-fiona python3-geographiclib python3-geopy python3-munch python3-pyproj python3-rtree python3-shapely Suggested packages: fiona-doc The following NEW packages will be installed: libspatialindex-c6 libspatialindex-dev libspatialindex6 pkg-config python3-click-plugins python3-cligj python3-descartes python3-fiona python3-geographiclib python3-geopandas python3-geopy python3-munch python3-pyproj python3-rtree python3-shapely 0 upgraded, 15 newly installed, 0 to remove and 4 not upgraded. Need to get 2,539 kB of archives. After this operation, 9,051 kB of additional disk space will be used. Do you want to continue? [Y/n] ... Get:15 http://mirrors.wikimedia.org/ubuntu jammy/universe amd64 python3-rtree all 0.9.7-1 [46.4 kB] Fetched 2,539 kB in 8s (333 kB/s) Selecting previously unselected package libspatialindex6:amd64. (Reading database ... 344713 files and directories currently installed.) Preparing to unpack .../00-libspatialindex6_1.9.3-2_amd64.deb ... Unpacking libspatialindex6:amd64 (1.9.3-2) ... Selecting previously unselected package libspatialindex-c6:amd64. Preparing to unpack .../01-libspatialindex-c6_1.9.3-2_amd64.deb ... Unpacking libspatialindex-c6:amd64 (1.9.3-2) ... Selecting previously unselected package pkg-config. Preparing to unpack .../02-pkg-config_0.29.2-1ubuntu3_amd64.deb ... Unpacking pkg-config (0.29.2-1ubuntu3) ... Selecting previously unselected package python3-click-plugins. Preparing to unpack .../03-python3-click-plugins_1.1.1-3_all.deb ... Unpacking python3-click-plugins (1.1.1-3) ... Selecting previously unselected package python3-cligj. Preparing to unpack .../04-python3-cligj_0.7.2-1_all.deb ... Unpacking python3-cligj (0.7.2-1) ... Selecting previously unselected package python3-descartes. Preparing to unpack .../05-python3-descartes_1.1.0-4_all.deb ... Unpacking python3-descartes (1.1.0-4) ... Selecting previously unselected package python3-munch. Preparing to unpack .../06-python3-munch_2.5.0-1_all.deb ... Unpacking python3-munch (2.5.0-1) ... Selecting previously unselected package python3-fiona. Preparing to unpack .../07-python3-fiona_1.8.21-1build1_amd64.deb ... Unpacking python3-fiona (1.8.21-1build1) ... Selecting previously unselected package python3-geographiclib. Preparing to unpack .../08-python3-geographiclib_1.52-1_amd64.deb ... Unpacking python3-geographiclib (1.52-1) ... Selecting previously unselected package python3-pyproj. Preparing to unpack .../09-python3-pyproj_3.3.0-2build1_amd64.deb ... Unpacking python3-pyproj (3.3.0-2build1) ... Selecting previously unselected package python3-shapely. Preparing to unpack .../10-python3-shapely_1.8.0-1build1_amd64.deb ... Unpacking python3-shapely (1.8.0-1build1) ... Selecting previously unselected package python3-geopandas. Preparing to unpack .../11-python3-geopandas_0.10.2-1_all.deb ... Unpacking python3-geopandas (0.10.2-1) ... Selecting previously unselected package python3-geopy. Preparing to unpack .../12-python3-geopy_2.2.0-1_all.deb ... Unpacking python3-geopy (2.2.0-1) ... Selecting previously unselected package libspatialindex-dev:amd64. Preparing to unpack .../13-libspatialindex-dev_1.9.3-2_amd64.deb ... Unpacking libspatialindex-dev:amd64 (1.9.3-2) ... Selecting previously unselected package python3-rtree. Preparing to unpack .../14-python3-rtree_0.9.7-1_all.deb ... Unpacking python3-rtree (0.9.7-1) ... Setting up python3-shapely (1.8.0-1build1) ... Setting up python3-cligj (0.7.2-1) ... Setting up python3-descartes (1.1.0-4) ... Setting up python3-geographiclib (1.52-1) ... Setting up libspatialindex6:amd64 (1.9.3-2) ... Setting up python3-pyproj (3.3.0-2build1) ... Setting up python3-munch (2.5.0-1) ... Setting up python3-geopy (2.2.0-1) ... Setting up python3-click-plugins (1.1.1-3) ... Setting up pkg-config (0.29.2-1ubuntu3) ... Setting up libspatialindex-c6:amd64 (1.9.3-2) ... Setting up libspatialindex-dev:amd64 (1.9.3-2) ... Setting up python3-fiona (1.8.21-1build1) ... Setting up python3-rtree (0.9.7-1) ... Setting up python3-geopandas (0.10.2-1) ... Processing triggers for man-db (2.10.2-1) ... Processing triggers for libc-bin (2.35-0ubuntu3) ...
Python3 xarray
xarray (0.21.1-1) | libfuse2:amd64 (2.9.9-5ubuntu3) ... | libhttp-parser2.9:amd64 (2.9.4-4) ... | libmbedcrypto7:amd64 (2.28.0-1build1) ... | libmbedx509-1:amd64 (2.28.0-1build1) ... | libmbedtls14:amd64 (2.28.0-1build1) ... | libgit2-1.1:amd64 (1.1.0+dfsg.1-4.1build1) ... | liblzf1:amd64 (3.6-3) ... | -asciitree (0.3.3-3) ... | -blosc (1.9.2+ds1-3build2) ... | -cftime (1.5.2+ds-1build1) ... | -cloudpickle (2.0.0-1) ... | -fsspec (2022.01.0-1) ... | -toolz (0.11.2-1) ... | -locket (0.2.1-1) ... | -partd (1.2.0-1) ... | -dask (2022.01.0+dfsg-1ubuntu1) ... | -msgpack (1.0.3-1build1) ... | -psutil (5.9.0-1build1) ... | -sortedcontainers (2.1.0-2) ... | -tblib (1.7.0-2) ... | -heapdict (1.0.1-1) ... | -zict (2.0.0-1) ... | -distributed (2022.01.0+ds.1-1) ... | -stone (3.3.1-1) ... | -dropbox (11.26.0-1) ... | -monotonic (1.6-2) ... | -fasteners (0.14.1-2) ... | -fusepy (3.0.1-2) ... | -h5py-serial (3.6.0-2build1) ... | -h5netcdf (0.12.0-1) ... | -nacl (1.5.0-2) ... | -netcdf4 (1.5.8-1build1) ... | -numcodecs (0.9.1+ds-2build1) ... | -bcrypt (3.2.0-1build1) ... | -paramiko (2.9.3-0ubuntu1) ... | -pygit2 (1.6.1+dfsg-2) ... | -zarr (2.10.3+ds-1) ... | -libarchive-c (2.9-0.1) ...
$ sudo apt install python3-xarray ... The following additional packages will be installed: libfuse2 libgit2-1.1 libhttp-parser2.9 liblzf1 libmbedcrypto7 libmbedtls14 libmbedx509-1 python3-asciitree python3-bcrypt python3-blosc python3-cftime python3-cloudpickle python3-dask python3-distributed python3-dropbox python3-fasteners python3-fsspec python3-fusepy python3-h5netcdf python3-h5py-serial python3-heapdict python3-libarchive-c python3-locket python3-monotonic python3-msgpack python3-nacl python3-netcdf4 python3-numcodecs python3-paramiko python3-partd python3-psutil python3-pygit2 python3-sortedcontainers python3-stone python3-tblib python3-toolz python3-zarr python3-zict Suggested packages: python-blosc-doc ipython python-dask-doc python3-bcolz python3-boto python3-graphviz python3-h5py python3-skimage python3-sklearn python3-sqlalchemy python-fsspec-doc python-h5py-doc python-nacl-doc python3-gssapi python3-invoke python-psutil-doc python-pygit2-doc python-sortedcontainers-doc python-toolz-doc python-xarray-doc python3-cartopy python3-pydap python3-seaborn jupyter-notebook The following NEW packages will be installed: libfuse2 libgit2-1.1 libhttp-parser2.9 liblzf1 libmbedcrypto7 libmbedtls14 libmbedx509-1 python3-asciitree python3-bcrypt python3-blosc python3-cftime python3-cloudpickle python3-dask python3-distributed python3-dropbox python3-fasteners python3-fsspec python3-fusepy python3-h5netcdf python3-h5py-serial python3-heapdict python3-libarchive-c python3-locket python3-monotonic python3-msgpack python3-nacl python3-netcdf4 python3-numcodecs python3-paramiko python3-partd python3-psutil python3-pygit2 python3-sortedcontainers python3-stone python3-tblib python3-toolz python3-xarray python3-zarr python3-zict 0 upgraded, 39 newly installed, 0 to remove and 16 not upgraded. Need to get 6,281 kB of archives. After this operation, 36.3 MB of additional disk space will be used. ... Get:39 http://mirrors.wikimedia.org/ubuntu jammy/universe amd64 python3-libarchive-c all 2.9-0.1 [14.5 kB] Fetched 6,281 kB in 19s (326 kB/s) Extracting templates from packages: 100% Selecting previously unselected package libfuse2:amd64. (Reading database ... 383465 files and directories currently installed.) Setting up python3-heapdict (1.0.1-1) ... Setting up python3-libarchive-c (2.9-0.1) ... Setting up python3-tblib (1.7.0-2) ... Setting up python3-numcodecs (0.9.1+ds-2build1) ... Setting up python3-bcrypt (3.2.0-1build1) ... Setting up python3-fsspec (2022.01.0-1) ... Setting up python3-xarray (0.21.1-1) ... Setting up python3-sortedcontainers (2.1.0-2) ... Setting up libfuse2:amd64 (2.9.9-5ubuntu3) ... Setting up python3-psutil (5.9.0-1build1) ... Setting up python3-cloudpickle (2.0.0-1) ... Setting up python3-monotonic (1.6-2) ... Setting up python3-blosc (1.9.2+ds1-3build2) ... Setting up python3-stone (3.3.1-1) ... Setting up libmbedcrypto7:amd64 (2.28.0-1build1) ... Setting up liblzf1:amd64 (3.6-3) ... Setting up python3-cftime (1.5.2+ds-1build1) ... Setting up python3-fasteners (0.14.1-2) ... Setting up python3-asciitree (0.3.3-3) ... Setting up python3-toolz (0.11.2-1) ... Setting up python3-msgpack (1.0.3-1build1) ... Setting up python3-zarr (2.10.3+ds-1) ... Setting up python3-zict (2.0.0-1) ... Setting up python3-locket (0.2.1-1) ... Setting up python3-netcdf4 (1.5.8-1build1) ... Setting up python3-nacl (1.5.0-2) ... Setting up libhttp-parser2.9:amd64 (2.9.4-4) ... Setting up python3-dropbox (11.26.0-1) ... Setting up python3-partd (1.2.0-1) ... Setting up libmbedx509-1:amd64 (2.28.0-1build1) ... Setting up libmbedtls14:amd64 (2.28.0-1build1) ... Setting up libgit2-1.1:amd64 (1.1.0+dfsg.1-4.1build1) ... Setting up python3-pygit2 (1.6.1+dfsg-2) ... Setting up python3-dask (2022.01.0+dfsg-1ubuntu1) ... Setting up python3-h5py-serial (3.6.0-2build1) ... Setting up python3-fusepy (3.0.1-2) ... Setting up python3-distributed (2022.01.0+ds.1-1) ... Setting up python3-h5netcdf (0.12.0-1) ... Setting up python3-paramiko (2.9.3-0ubuntu1) ... Processing triggers for man-db (2.10.2-1) ... Processing triggers for libc-bin (2.35-0ubuntu3) ..
osm2pgsql
osm2pgsql | gdal-data (3.4.1+dfsg-1build4) ... | libgdal30 (3.4.1+dfsg-1build4) ... | libgeos3.10.2:amd64 (3.10.2-1) ... | libgeos-c1v5:amd64 (3.10.2-1) ... | proj-data (8.2.1-1) ... | libproj22:amd64 (8.2.1-1) ... | proj-bin (8.2.1-1) ... | python3-pyosmium (3.2.0-1build1) ... | osm2pgsql (1.6.0+ds-1) ... | postgresql-14-postgis-3 (3.2.0+dfsg-1ubuntu1) ... | postgis (3.2.0+dfsg-1ubuntu1) ... | postgis-doc (3.2.0+dfsg-1ubuntu1) ... | postgresql-14-postgis-3-scripts (3.2.0+dfsg-1ubuntu1) ... | python3-psycopg2 (2.9.2-1build2) ... | libgeotiff5:amd64 (1.7.0-2build1) ... | mysql-common (5.8+1.0.8) ... | libmysqlclient21:amd64 (8.0.29-0ubuntu0.22.04.2) ... | libnetcdf19:amd64 (1:4.8.1-1) ... | libhdf5-103-1:amd64 (1.10.7+repack-4ubuntu2) ... | libhdf5-hl-100:amd64 (1.10.7+repack-4ubuntu2) ... | libhdf4-0-alt (4.2.15-4) ... | libkmlbase1:amd64 (1.3.0-9) ... | libkmldom1:amd64 (1.3.0-9) ... | libkmlengine1:amd64 (1.3.0-9) ... | libprotobuf-c1:amd64 (1.3.3-1ubuntu2) ... | libsfcgal1 (1.4.1-1) ... | libodbc2:amd64 (2.3.9-5) ... | unixodbc-common (2.3.9-5) ... | libodbcinst2:amd64 (2.3.9-5) ... | libogdi4.1 (4.1.0+ds-5) ... | libqhull-r8.0:amd64 (2020.2-4) ... | librttopo1:amd64 (1.1.0-2) ... | libspatialite7:amd64 (5.0.1-2build2) ... | libxerces-c3.2:amd64 (3.2.3+debian-3build1) ... | libaec0:amd64 (1.0.6-1) ... | libgmpxx4ldbl:amd64 (2:6.2.1+dfsg-3ubuntu1) ... | libsz2:amd64 (1.0.6-1) ... | liburiparser1:amd64 (0.9.6+dfsg-1) ... | libarpack2:amd64 (3.8.0-1) ... | libsuperlu5:amd64 (5.3.0+dfsg1-2) ... | libarmadillo10 (1:10.8.2+dfsg-1) ... | libblosc1:amd64 (1.21.1+ds2-2) ... | libboost-serialization1.74.0:amd64 (1.74.0-14ubuntu3) ... | libcfitsio9:amd64 (4.0.0-1) ... | libcharls2:amd64 (2.3.4-1) ... | libfyba0:amd64 (4.1.1-7) ... | libfreexl1:amd64 (1.0.6-1) ... | grass-doc (7.8.7-1) ... | grass-core (7.8.7-1) ... | libgdal-grass (3.4.1-3) ...
$ sudo apt install --yes osm2pgsql [sudo] password for mjam: Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: gdal-data libaec0 libarmadillo10 libarpack2 libblosc1 libboost-serialization1.74.0 libcfitsio9 libcharls2 libfreexl1 libfyba0 libgdal30 libgeos-c1v5 libgeos3.10.2 libgeotiff5 libgmpxx4ldbl libhdf4-0-alt libhdf5-103-1 libhdf5-hl-100 libkmlbase1 libkmldom1 libkmlengine1 libmysqlclient21 libnetcdf19 libodbc2 libodbcinst2 libogdi4.1 libproj22 libprotobuf-c1 libqhull-r8.0 librttopo1 libsfcgal1 libspatialite7 libsuperlu5 libsz2 liburiparser1 libxerces-c3.2 mysql-common postgis postgis-doc postgresql-14-postgis-3 postgresql-14-postgis-3-scripts proj-bin proj-data python3-psycopg2 python3-pyosmium unixodbc-common Suggested packages: geotiff-bin gdal-bin libgeotiff-epsg libhdf4-doc libhdf4-alt-dev hdf4-tools odbc-postgresql tdsodbc ogdi-bin python-psycopg2-doc python3-shapely pyosmium-doc The following NEW packages will be installed: gdal-data libaec0 libarmadillo10 libarpack2 libblosc1 libboost-serialization1.74.0 libcfitsio9 libcharls2 libfreexl1 libfyba0 libgdal30 libgeos-c1v5 libgeos3.10.2 libgeotiff5 libgmpxx4ldbl libhdf4-0-alt libhdf5-103-1 libhdf5-hl-100 libkmlbase1 libkmldom1 libkmlengine1 libmysqlclient21 libnetcdf19 libodbc2 libodbcinst2 libogdi4.1 libproj22 libprotobuf-c1 libqhull-r8.0 librttopo1 libsfcgal1 libspatialite7 libsuperlu5 libsz2 liburiparser1 libxerces-c3.2 mysql-common osm2pgsql postgis postgis-doc postgresql-14-postgis-3 postgresql-14-postgis-3-scripts proj-bin proj-data python3-psycopg2 python3-pyosmium unixodbc-common 0 upgraded, 47 newly installed, 0 to remove and 4 not upgraded. Need to get 40.6 MB of archives. After this operation, 159 MB of additional disk space will be used. ... Get:47 http://mirrors.wikimedia.org/ubuntu jammy/universe amd64 proj-bin amd64 8.2.1-1 [154 kB] Fetched 40.6 MB in 1min 46s (384 kB/s) Extracting templates from packages: 100% Selecting previously unselected package gdal-data. (Reading database ... 307329 files and directories currently installed.) ... Setting up libgeos3.10.2:amd64 (3.10.2-1) ... Setting up mysql-common (5.8+1.0.8) ... update-alternatives: using /etc/mysql/my.cnf.fallback to provide /etc/mysql/my.cnf (my.cnf) in auto mode Setting up libmysqlclient21:amd64 (8.0.29-0ubuntu0.22.04.2) ... Setting up libxerces-c3.2:amd64 (3.2.3+debian-3build1) ... Setting up proj-data (8.2.1-1) ... Setting up libogdi4.1 (4.1.0+ds-5) ... Setting up libcharls2:amd64 (2.3.4-1) ... Setting up libarpack2:amd64 (3.8.0-1) ... Setting up libsuperlu5:amd64 (5.3.0+dfsg1-2) ... Setting up libqhull-r8.0:amd64 (2020.2-4) ... Setting up libproj22:amd64 (8.2.1-1) ... Setting up postgresql-14-postgis-3-scripts (3.2.0+dfsg-1ubuntu1) ... update-alternatives: using /usr/share/postgresql/14/extension/postgis-3.control to provide /usr/share/postgresql/14/extension/postgis.control (postgresql-14-postgis.control) in auto mode Setting up libprotobuf-c1:amd64 (1.3.3-1ubuntu2) ... Setting up libaec0:amd64 (1.0.6-1) ... Setting up gdal-data (3.4.1+dfsg-1build4) ... Setting up libgeotiff5:amd64 (1.7.0-2build1) ... Setting up python3-pyosmium (3.2.0-1build1) ... Setting up libcfitsio9:amd64 (4.0.0-1) ... Setting up postgis-doc (3.2.0+dfsg-1ubuntu1) ... Setting up libgmpxx4ldbl:amd64 (2:6.2.1+dfsg-3ubuntu1) ... Setting up python3-psycopg2 (2.9.2-1build2) ... Setting up libgeos-c1v5:amd64 (3.10.2-1) ... Setting up unixodbc-common (2.3.9-5) ... Setting up libhdf4-0-alt (4.2.15-4) ... Setting up libboost-serialization1.74.0:amd64 (1.74.0-14ubuntu3) ... Setting up libodbc2:amd64 (2.3.9-5) ... Setting up liburiparser1:amd64 (0.9.6+dfsg-1) ... Setting up librttopo1:amd64 (1.1.0-2) ... Setting up libfreexl1:amd64 (1.0.6-1) ... Setting up libfyba0:amd64 (4.1.1-7) ... Setting up libkmlbase1:amd64 (1.3.0-9) ... Setting up libblosc1:amd64 (1.21.1+ds2-2) ... Setting up libsfcgal1 (1.4.1-1) ... Setting up libsz2:amd64 (1.0.6-1) ... Setting up libkmldom1:amd64 (1.3.0-9) ... Setting up libspatialite7:amd64 (5.0.1-2build2) ... Setting up osm2pgsql (1.6.0+ds-1) ... Setting up libodbcinst2:amd64 (2.3.9-5) ... Setting up libarmadillo10 (1:10.8.2+dfsg-1) ... Setting up libkmlengine1:amd64 (1.3.0-9) ... Setting up proj-bin (8.2.1-1) ... Setting up libhdf5-103-1:amd64 (1.10.7+repack-4ubuntu2) ... Setting up libhdf5-hl-100:amd64 (1.10.7+repack-4ubuntu2) ... Setting up libnetcdf19:amd64 (1:4.8.1-1) ... Setting up libgdal30 (3.4.1+dfsg-1build4) ... Setting up postgresql-14-postgis-3 (3.2.0+dfsg-1ubuntu1) ... Setting up postgis (3.2.0+dfsg-1ubuntu1) ... Processing triggers for postgresql-common (238) ... Building PostgreSQL dictionaries from installed myspell/hunspell packages... Removing obsolete dictionary files: Processing triggers for libc-bin (2.35-0ubuntu3) ... Processing triggers for man-db (2.10.2-1) ... mjam@x10jam:~/srcs_mjam$ sudo apt install geotiff-bin gdal-bin Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: python3-gdal python3-numpy Suggested packages: libgdal-grass libgeotiff-epsg gfortran python-numpy-doc python3-dev python3-pytest The following NEW packages will be installed: gdal-bin geotiff-bin python3-gdal python3-numpy 0 upgraded, 4 newly installed, 0 to remove and 4 not upgraded. Need to get 4,408 kB of archives. After this operation, 25.0 MB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://mirrors.wikimedia.org/ubuntu jammy/main amd64 python3-numpy amd64 1:1.21.5-1build2 [3,464 kB] Get:2 http://mirrors.wikimedia.org/ubuntu jammy/universe amd64 python3-gdal amd64 3.4.1+dfsg-1build4 [673 kB] Get:3 http://mirrors.wikimedia.org/ubuntu jammy/universe amd64 gdal-bin amd64 3.4.1+dfsg-1build4 [241 kB] Get:4 http://mirrors.wikimedia.org/ubuntu jammy/universe amd64 geotiff-bin amd64 1.7.0-2build1 [30.3 kB] Fetched 4,408 kB in 12s (360 kB/s) Setting up python3-numpy (1:1.21.5-1build2) ... Setting up geotiff-bin (1.7.0-2build1) ... Setting up python3-gdal (3.4.1+dfsg-1build4) ... Setting up gdal-bin (3.4.1+dfsg-1build4) ... Processing triggers for man-db (2.10.2-1) ... mjam@x10jam:~/srcs_mjam$ sudo apt install libgdal-grass Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: grass-core grass-doc javascript-common libjs-jquery python3-distutils python3-lib2to3 Suggested packages: grass-dev grass-gui e00compr avce00 gnuplot gpsbabel gpstrans python3-rpy2 python3-termcolor grass grass-dev-doc The following NEW packages will be installed: grass-core grass-doc javascript-common libgdal-grass libjs-jquery python3-distutils python3-lib2to3 0 upgraded, 7 newly installed, 0 to remove and 4 not upgraded. Need to get 42.0 MB of archives. After this operation, 75.9 MB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://mirrors.wikimedia.org/ubuntu jammy/main amd64 libjs-jquery all 3.6.0+dfsg+~3.5.13-1 [321 kB] Get:2 http://mirrors.wikimedia.org/ubuntu jammy/universe amd64 grass-doc all 7.8.7-1 [34.9 MB] Get:3 http://mirrors.wikimedia.org/ubuntu jammy/main amd64 python3-lib2to3 all 3.10.4-0ubuntu1 [76.2 kB] Get:4 http://mirrors.wikimedia.org/ubuntu jammy/main amd64 python3-distutils all 3.10.4-0ubuntu1 [138 kB] Get:5 http://mirrors.wikimedia.org/ubuntu jammy/universe amd64 grass-core amd64 7.8.7-1 [6,548 kB] Get:6 http://mirrors.wikimedia.org/ubuntu jammy/main amd64 javascript-common all 11+nmu1 [5,936 B] Get:7 http://mirrors.wikimedia.org/ubuntu jammy/universe amd64 libgdal-grass amd64 3.4.1-3 [27.7 kB] Fetched 42.0 MB in 1min 56s (363 kB/s) Selecting previously unselected package libjs-jquery. (Reading database ... 309873 files and directories currently installed.) Preparing to unpack .../0-libjs-jquery_3.6.0+dfsg+~3.5.13-1_all.deb ... Unpacking libjs-jquery (3.6.0+dfsg+~3.5.13-1) ... Selecting previously unselected package grass-doc. Preparing to unpack .../1-grass-doc_7.8.7-1_all.deb ... Unpacking grass-doc (7.8.7-1) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../2-python3-lib2to3_3.10.4-0ubuntu1_all.deb ... Unpacking python3-lib2to3 (3.10.4-0ubuntu1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../3-python3-distutils_3.10.4-0ubuntu1_all.deb ... Unpacking python3-distutils (3.10.4-0ubuntu1) ... Selecting previously unselected package grass-core. Preparing to unpack .../4-grass-core_7.8.7-1_amd64.deb ... Unpacking grass-core (7.8.7-1) ... Selecting previously unselected package javascript-common. Preparing to unpack .../5-javascript-common_11+nmu1_all.deb ... Unpacking javascript-common (11+nmu1) ... Selecting previously unselected package libgdal-grass. Preparing to unpack .../6-libgdal-grass_3.4.1-3_amd64.deb ... Unpacking libgdal-grass (3.4.1-3) ... Setting up javascript-common (11+nmu1) ... apache2_invoke: Enable configuration javascript-common Setting up libjs-jquery (3.6.0+dfsg+~3.5.13-1) ... Setting up python3-lib2to3 (3.10.4-0ubuntu1) ... Setting up python3-distutils (3.10.4-0ubuntu1) ... Setting up grass-doc (7.8.7-1) ... Setting up grass-core (7.8.7-1) ... Setting up libgdal-grass (3.4.1-3) ... Processing triggers for desktop-file-utils (0.26-1ubuntu3) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for man-db (2.10.2-1) ... Processing triggers for mailcap (3.70+nmu1ubuntu1) ... mjam@x10jam:~/srcs_mjam$ sudo apt install libgdal-grass Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: grass-core grass-doc javascript-common libjs-jquery python3-distutils python3-lib2to3 Suggested packages: grass-dev grass-gui e00compr avce00 gnuplot gpsbabel gpstrans python3-rpy2 python3-termcolor grass grass-dev-doc The following NEW packages will be installed: grass-core grass-doc javascript-common libgdal-grass libjs-jquery python3-distutils python3-lib2to3 0 upgraded, 7 newly installed, 0 to remove and 4 not upgraded. Need to get 42.0 MB of archives. After this operation, 75.9 MB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://mirrors.wikimedia.org/ubuntu jammy/main amd64 libjs-jquery all 3.6.0+dfsg+~3.5.13-1 [321 kB] Get:2 http://mirrors.wikimedia.org/ubuntu jammy/universe amd64 grass-doc all 7.8.7-1 [34.9 MB] Get:3 http://mirrors.wikimedia.org/ubuntu jammy/main amd64 python3-lib2to3 all 3.10.4-0ubuntu1 [76.2 kB] Get:4 http://mirrors.wikimedia.org/ubuntu jammy/main amd64 python3-distutils all 3.10.4-0ubuntu1 [138 kB] Get:5 http://mirrors.wikimedia.org/ubuntu jammy/universe amd64 grass-core amd64 7.8.7-1 [6,548 kB] Get:6 http://mirrors.wikimedia.org/ubuntu jammy/main amd64 javascript-common all 11+nmu1 [5,936 B] Get:7 http://mirrors.wikimedia.org/ubuntu jammy/universe amd64 libgdal-grass amd64 3.4.1-3 [27.7 kB] Fetched 42.0 MB in 1min 56s (363 kB/s) Selecting previously unselected package libjs-jquery. (Reading database ... 309873 files and directories currently installed.) Setting up javascript-common (11+nmu1) ... apache2_invoke: Enable configuration javascript-common Setting up libjs-jquery (3.6.0+dfsg+~3.5.13-1) ... Setting up python3-lib2to3 (3.10.4-0ubuntu1) ... Setting up python3-distutils (3.10.4-0ubuntu1) ... Setting up grass-doc (7.8.7-1) ... Setting up grass-core (7.8.7-1) ... Setting up libgdal-grass (3.4.1-3) ... Processing triggers for desktop-file-utils (0.26-1ubuntu3) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for man-db (2.10.2-1) ... Processing triggers for mailcap (3.70+nmu1ubuntu1) ...