Building Mapguide on Ubuntu 7.10 Server
WORK IN PROGRESS - DO NOT USE!!!
Below are instructions that will aid a user with installing FDO 3.3 and MapGuide Open Source 2.0 from SVN trunk on Ubuntu 7.10 (Gutsy Gibbon) Server. It is based on previous instructions, credit to their authors!
BASIC SETUP
Install a basic Ubuntu Server 7.10 (Gutsy Gibbon)
The default directory used in these instructions is called /home/administrator. This assumes that you created your primary user account with the name "administrator". If you did not, mentally adjust where necessary.
By the time you read this, FDO 3.3 and MapGuide 2.0 may have their own branches in SVN. If so, just swap out references to /trunk/ with the appropriate /branch/* where necessary.
You may want to consider using a client like PuTTY to access your server's terminal via openssh-server. This really helps with copying and pasting. If so, either ensure that you install this service during your basic install, or add "openssh-server" to the list of packages below.
Type the following in Terminal to install the prerequisite build tools:
sudo apt-get install subversion build-essential gcc g++ bison flex automake1.9 libjpeg62-dev libtool zlib1g zlib1g-dev libxml2-dev make libxalan110 libxalan110-dev
To avoid "bad fd number" errors completely, type the following in the terminal:
sudo dpkg-reconfigure dash
and choose No at the prompt. Be aware that this changes your default /bin/sh from dash back to bash.
Prepare your SVN profile to use the appropriate options for FDO and MapGuide. Type the following at the Terminal.
svn info http://svn.osgeo.org/fdo
(this just sets up your initial .subversion settings folder)
nano .subversion/config
Edit config with the following. You can enable options by removing the comments (# ) in front of them, or just add new lines to the appropriate locations:
(in the Miscellany section, enable)
Use-commit-times=yes Enable-auto-props=yes
(in the Auto-Props section, add)
*.*=svn:eol-style=native *.sh=svn:executable
Save and close the config file.
FDO INSTALL
In terminal type the following:
svn co http://svn.osgeo.org/fdo/trunk fdosvn --username=guest --password=guest
sudo mkdir /usr/local/fdo-3.3.0
(type in your password if prompted)
sudo chown administrator /usr/local/fdo-3.3.0
(make sure that if you are not logged in as administrator, you change this to your userid)
cd fdosvn
source ./setenvironment.sh
In terminal, type the following to run the builds:
nohup ./build_thirdparty.sh
nohup ./build_linux.sh
Here be Dragons - Uncharted territory not yet edited
APACHE / PHP INSTALL
In Terminal type the following:
cd .. (you should now be in /home/administrator)
mkdir mgdev
cd mgdev
svn co http://svn.osgeo.org/mapguide/branches/1.2.x
In Terminal, install the following:
sudo apt-get install libcurl3 libcurl3-dev libxslt1.1 libxslt1-dev expat
In Terminal:
mkdir /usr/local/mapguideopensource
sudo chown administrator /usr/local/mapguideopensource (replace administrator with your user if necessary)
Edit the following file /etc/apt/sources.list to include the multiverse
nano sources.list
In Terminal, install the following:
sudo apt-get install sun-java5-jdk (accept the license)
In Terminal type the following:
(be sure to change the version of java to the one you download (i.e., 1.5.0.11, 1.5.0.12, etc.))
export JAVA_HOME=/usr/lib/jvm/java-1.5.0-sun-1.5.0.11
cd /home/administrator/MgDev/1.2.x/MgDev/Oem/LinuxApt
find . –name “*.gz” –exec tar zxf {} “;”
./build_apt.sh
BUILD OEM
In Terminal, install the following:
sudo apt-get install automake1.7 libasound2-Dev
In Terminal:
cd /home/administrator/MgDev/1.2.x/MgDev
pushd Oem/CppUnit-1.9.14
rm aclocal.m4
popd
./build_oem.sh
If build_oem.sh fails at the DWF toolkit component and complains about AM_PROG_LIBTOOL not found, install libtool:
sudo apt-get install libtool
and re-run build_oem.sh reference
BUILD MAPGUIDE
In Terminal, install the following:
sudo apt-get install libexpat1 libexpat1-dev doxygen
In Terminal:
sudo chown administrator /usr/lib/python2.4
sudo chown administrator /usr/lib/python2.5
aclocal
libtoolize --force
automake --add-missing --copy
autoconf
./configure - -without-python
make
make install
To activate webstudio, you have to copy the files to the webserverextension folder as follows:
cp -R /home/administrator/mgdev/1.2.x/MgDev/Web/src/webstudio “SPACE” /usr/local/mapguideopensource/webserverextensions/www/webstudio
The above command should be all one line, with a 'space' between webstudio and /usr
Reboot the server
To start Mapguide on the server:
cd /usr/local/mapguideopensource/webtierextensions/apache2/bin
./httpd
cd /usr/local/mapguideopensource/server/bin
./mgserver.sh
Enjoy!