Building Mapguide on Ubuntu 7.10 Server

From OSGeo
Revision as of 16:38, 12 November 2007 by Wiki-Jasonbirch (talk | contribs) (Hmm; didn't know that was how to build release...)
Jump to navigation Jump to search

NOT ready for Prime Time!!!

Below are instructions that will aid a user with installing FDO 3.3 and MapGuide Open Source 2.0 from SVN trunk on Ubuntu 7.10 (Gutsy Gibbon) Server. It is based on previous instructions, credit to their authors!

NOTES

By the time you read this, FDO 3.3 and MapGuide 2.0 may have their own branches in SVN. If so, just swap out references to /trunk/ with the appropriate /branch/* where necessary.

The default directory used in these instructions is called /home/administrator. This assumes that you create your primary user account with the name "administrator". If you do not, mentally adjust where necessary.

You may want to consider using a client like PuTTY to access your server's terminal via openssh-server from a different computer. This really helps with copying and pasting. If so, either ensure that you install the OpenSSH server during your basic install, or add "openssh-server" to the list of packages below.

Any time that you run a task and pipe its output to a logfile, make sure that you look at the end of the logfile when you're done to make sure that it completed successfully. If it didn't then you have the logfile to post an error report from... Here's an example of how to do this: 

tail -n 30 mylogfile.log

BASIC SETUP

Install a basic Ubuntu Server 7.10 (Gutsy Gibbon). Once this is complete, you will have to add some extra packages to compile MapGuide. Make sure that you get all of these packages; the line is really long: 

sudo apt-get install build-essential bison flex automake1.7 automake1.9 libtool doxygen subversion libjpeg62-dev libpng12-dev libfreetype6-dev libexpat1-dev libxalan110-dev libxslt1-dev expat libcurl4-openssl-dev libasound2-Dev python2.5-dev sun-java5-jdk

If Java fails to install, you may need to edit /etc/apt/sources.list to uncomment the multiverse repository lines and then try installing it again

(make note of which version of Java was installed, and use the correct one below) 

export JAVA_HOME=/usr/lib/jvm/java-1.5.0-sun-1.5.0.13

To avoid "bad fd number" errors, type the following in the terminal: 

sudo dpkg-reconfigure dash

and choose No at the prompt. Be aware that this changes your default /bin/sh from dash back to bash.

Prepare your SVN profile to use the appropriate options for FDO and MapGuide. Type the following at the Terminal.

(this just sets up your initial .subversion settings folder) 

svn info http://svn.osgeo.org/fdo

(edit ~/.subversion/config) 

nano .subversion/config

You can enable options by removing the comments (# ) in front of them, or just add new lines to the appropriate locations.

In the Miscellany section, enable: 

Use-commit-times=yes
Enable-auto-props=yes

In the Auto-Props section, add: 

*.*=svn:eol-style=native
*.sh=svn:executable

Save and close the config file.

FDO INSTALL

In terminal type the following: 

mkdir fdosvn

(be prepared to wait a long time for this command to complete, the test data takes a while to download) 

svn checkout http://svn.osgeo.org/fdo/trunk fdosvn

(type in your password after the following command if prompted) 

sudo mkdir /usr/local/fdo-3.3.0

(if you are not logged in as administrator, you change the userid below!) 

sudo chown administrator /usr/local/fdo-3.3.0

cd fdosvn

source ./setenvironment.sh

In terminal, type the following to run the builds. Note, there will be no output from either command until completion as it is all being spooled to nohup.out. You can log into another terminal session and tail this file if you start getting antsy :-) 

nohup ./build_thirdparty.sh > build_thirdparty.log

nohup ./build_linux.sh > build_linux.log

APACHE / PHP INSTALL

In Terminal type the following: 

cd ~

(you should now be in /home/administrator, or whatever your $HOME is) 

mkdir mgsvn

svn checkout http://svn.osgeo.org/mapguide/trunk/MgDev/ mgsvn

sudo mkdir /usr/local/mapguideopensource

(replace administrator with your userid if necessary) 

sudo chown administrator /usr/local/mapguideopensource

cd mgsvn/Oem/LinuxApt

(careful when copying and pasting this line, the - got changed into . for me) 

find . -name "*.gz" -exec tar xzf {} \;

nohup ./build_apt.sh > ../../build_apt.log

BUILD OEM

Perform the following: 

cd ~/mgsvn/

nohup ./build_oem.sh > build_oem.log

BUILD MAPGUIDE

Go for the gusto: 

 aclocal
 libtoolize --force
 automake --add-missing --copy
 autoconf

 ./configure --enable-optimized

 nohup make > make_mapguide.log

Here be Dragons - Uncharted territory not yet tested

make install

Not sure yet if these are needed...

sudo chown administrator /usr/lib/python2.4

sudo chown administrator /usr/lib/python2.5


To activate webstudio, you have to copy the files to the webserverextension folder as follows:

cp -R /home/administrator/mgdev/1.2.x/MgDev/Web/src/webstudio “SPACE” /usr/local/mapguideopensource/webserverextensions/www/webstudio

The above command should be all one line, with a 'space' between webstudio and /usr

Reboot the server

To start Mapguide on the server:

cd /usr/local/mapguideopensource/webtierextensions/apache2/bin

./httpd

cd /usr/local/mapguideopensource/server/bin

./mgserver.sh

Enjoy!

Retrieved from "http://wiki.osgeo.org/w/index.php?title=Building_Mapguide_on_Ubuntu_7.10_Server&oldid=20678"