Enterprise Linux GIS

From OSGeo
Jump to navigation Jump to search

This page gathers links and information about running FLOSS GIS software on Enterprise Linux (shortened EL hereafter) and derivatives, that is Red Hat Enterprise Linux (RHEL), CentOS and Scientific Linux.

EL is a popular and robust platform for servers and computing-heavy workstations, and is therefore a good fit for the specific requirements of GIS.

The mailing list el@lists.osgeo.org is used for communication (with an online archive).

Useful repositories for GIS software

  • EPEL is an official Fedora project which repackages many Fedora packages which are not part of the standard EL distribution. It contains quite a few GIS packages and base libraries. Note that one of the rules of the packages maintained in EPEL is that they should never require to change the base EL distribution.
  • ELGIS repositories try to ensure that the latest stable version of the major FLOSS GIS software are available for Enterprise Linux. They maintain versions of packages which cannot be maintained in EPEL, or that EPEL does not want to keep at the latest stable version. This is where our packaging effort currently takes place, and can be seen as a kind of backport repository. It requires EPEL to be configured as a repository.

Collaboration with Fedora and EPEL

The following principles clarify the collaboration with the Fedora and EPEL projects and which packages are supposed to be maintained in the ELGIS repository:

  • in general, Fedora packages are the upstream source for Enterprise Linux packages (be they in the EPEL or ELGIS repos)
  • the ELGIS repos depends on the EPEL repo, they complement it and sometimes override it
  • for EL 5, the GIS packages in EPEL will most probably not be updated, so the mission of the ELGIS repos is to provide up to date packages until there is no more interest for them (as will be discussed on a case by case basis on the ELGIS list)
  • for EL 6, the GIS packages will mostly be provided by EPEL. Later on in the life cycle of the platform, if EPEL doesn't want to keep the packages up to date, the ELGIS repos may take over as it did for EL 5
  • packages that cannot be in EPEL (typically because they require to update the base platform) can be maintained in the ELGIS Plus repo (it is expected that there will be very few of them at the beginning of the EL6 life cycle)
  • our goal is not primarily to provide packages but also to serve as a knowledge base for FLOSS GIS software usage on Enterprise Linux. Therefore EL specific questions related to GIS packages from EPEL are welcome on the ELGIS list and information about them will be documented in the other resources provided by the OSGeo foundation (wiki, trac, etc.)

Packages Status Summary

Detailed package lists for ELGIS are available here: http://elgis.argeo.org

Package Version (stable) Version (testing) Repository Comment
gdal 1.7.2 1.8.0 elgis built against postgresql84, PCRaster support available in testing. Java bindings under development in testing.
geos 3.2.2 elgis
gpsbabel 1.3.3 epel
grass 6.4.0 elgis no NVIZ and digitizer in the wxPython UI (has been removed from upstream, use -tcltk UI; scheduled for 6.4.1)
mapnik 0.7.1 elgis-plus requires to update the boost library
mapserver 5.6.5 5.6.6 elgis in testing: xml map files and php-mapserver-proj
mod_geocache 0.2.1 elgis
osm2pgsql 0.1.20100821svn elgis built against postgresql84
pgrouting 1.03 1.05 elgis built against postgresql84, with TSP support
postgis 1.5.2 elgis built against postgresql84
proj 4.7.0 elgis
qgis 1.5.0 1.6.0 elgis-plus based on EPEL's python26, requires to update qt4
tinyows 0.6.0 elgis

If you want to contribute packages to the ELGIS repo

  • Especially for new packages, please try to build them in mock first (the one from CentOS, not from EPEL!), so that all build dependencies are in the spec file. You can find some mock config files here. Don't hesitate to ask on the mailing-list if you need support for your first mock builds: this is much easier than it seems, and very clean

Then send you spec file to the mailing-list or give download access to an SRPM.

How To

How to enable the ELGIS repository

sudo rpm -Uvh http://elgis.argeo.org/repos/5/elgis-release-5-5_0.noarch.rpm
  • if you want to install QGIS, edit the /etc/yum.repos.d/elgis.repo file and enable the 'elgis-plus'. WARNING: this updates the base distribution

How to hack and locally build the ELGIS packages

For the time being, the ELGIS packages (that is, those not maintained by EPEL) are versioned by and distributed through argeo.org.

You can see the currently versioned packages here:

Note: simply accept the self-signed certificate

You can checkout all the packages:

svn co https://projects.argeo.org/elgis/svn/factory/trunk/rpmbuild rpms

Or one by one, for example:

svn co https://projects.argeo.org/elgis/svn/factory/trunk/rpmbuild/elgis/gdal gdal

Each package directory follows the directory structure expected by rpmbuild (see how to set an rpmbuild environment).

We version only the spec files (under <package name>/SPECS/<package name>.spec) and the patches or some light sources (under <package name>/SOURCES). The source packages of the underlying libraries needs to be downloaded in the SOURCES directory.

Please send patches to the spec files to the el@lists.osgeo.org mailing-list.

In order to actually build, you can then configure %_topdir in your ~/.rpmmacros file to point to where you checked out a package, for example:

%_topdir %(echo $HOME)/dev/rpmbuild
%rhel 5
%packager Mathieu Baudier <mbaudier@argeo.org>
%dist .el5.elgis

A more persistent alternative is to have the two following files in each package directory:

  • <package directory>/rpmrc
include: /usr/lib/rpm/rpmrc
macrofiles: /usr/lib/rpm/macros:/usr/lib/rpm/ia32e-linux/macros:/usr/lib/rpm/redhat/macros:/etc/rpm/macros.*:/etc/rpm/macros:/etc/rpm/ia32e-linux/macros:~/.rpmmacros:<package directory>/rpmmacros

(note the ':<package directory>/rpmmacros' appended at the end of the macrofiles line)

  • <package directory>/rpmmacros
%_topdir <package directory>
%rhel 5
%packager Mathieu Baudier <mbaudier@argeo.org>
%dist .el5.argeo

And then call rpmbuild as follow

cd <package directory>
rpmbuild --rcfile=rpmrc -ba SPECS/<package name>.spec

These two files are registered in svn:ignore and can typically be automatically generated by scripts or a build framework.

How to deploy GeoServer 2.0 on Tomcat 5 (standard packages)

This how-to goes through the various steps required to have GeoServer 2.0 running as a Java web application inside the standard Tomcat 5 container. It has been tested with CentOS 5.5 x86_64.

Basic install (with base OpenJdk)

  • Install the required packages
sudo yum install java-1.6.0-openjdk-devel tomcat5
  • (optional) Install tomcat-native frop EPEL
sudo yum install tomcat-native
  • Download GeoServer
cd ~/Downloads
wget http://downloads.sourceforge.net/project/geoserver/GeoServer/2.0.2/geoserver-2.0.2-war.zip?&use_mirror=mesh
  • Unpack to Tomcat webapps
cd /var/lib/tomcat5/webapps/
sudo unzip ~/Downloads/geoserver-2.0.2-war.zip geoserver.war
  • Create a separate data directory
sudo mkdir -p /var/lib/geoserver
cd /var/lib/geoserver
sudo jar -xvf /var/lib/tomcat5/webapps/geoserver.war data
sudo chown -R tomcat.tomcat /var/lib/geoserver
  • Update /etc/tomcat/tomcat5.conf to add the recommended Java settings and to point to the data directory. You can increase/decrease the maximum memory allocated to Java with the -Xmx flag (-Xms is the initial allocation):
# Geoserver recommended
# http://docs.geoserver.org/stable/en/user/production/container.html
JAVA_OPTS="-showversion -server -Xmx512m -Xms64m -XX:SoftRefLRUPolicyMSPerMB=36000 -XX:MaxPermSize=128m -XX:+UseParallelGC"
JAVA_OPTS="$JAVA_OPTS -DGEOSERVER_DATA_DIR=/var/lib/geoserver/data"
  • Add an AJP proxy in the Apache configuration (e.g. in /etc/httpd/conf.d/geoserver.conf)
<Location /geoserver/>
	ProxyPass  ajp://localhost:8009/geoserver/
	# Uncomment to forbid non ssl access
	#RequireSSL
</Location>
  • (optional) If using SELinux, allow the proxying by setting the appropriate boolean
setsebool -P httpd_can_network_connect=1
  • Start Tomcat
sudo /sbin/service tomcat5 start
  • (optional) You can tail Tomcat logs to make sure that it is starting properly
tail -500f /var/log/tomcat5/catalina.out
  • Restart Apache
sudo /sbin/service httpd restart

With Sun/Oracle JRE and JAI native (recommended by GeoServer)

GeoServer documentation recommends to use a Sun/Oracle JRE with the JAI and JAI-ImageIO native extensions. There was an obvious performaince gain inthe tile generation by doing so

  • Download in install Sun/Oracle JDK in /opt (a JRE should be enough)
  • Hack the /usr/bin/dtomcat5 script to add an explicit reference to Sun/Oracle JDK at the beginning (did not find any better way neither through /etc/tomcat5/tomcat5.conf nor /etc/init.d/tomcat5 nor the alternatives system, ideas welcome...)
...
JAVA_HOME=/opt/jdk1.6.0_21
...
  • Go into the Sun JDK directory:
cd /opt/jdk1.6.0_21
sudo sh ~/Downloads/jai-1_1_3-lib-linux-amd64-jdk.bin
sed s/+215/-n+215/ jai_imageio-1_1-lib-linux-amd64-jdk.bin > jai_imageio-1_1-lib-linux-amd64-jdk-fixed.bin
  • Install JAI-ImageIO
sudo sh ~/Downloads/jai_imageio-1_1-lib-linux-amd64-jdk-fixed.bin
  • Restart Tomcat
sudo /sbin/service tomcat5 restart
  • Visit your GeoServer status page in order to make sure that native JAI is taken into account

LDAP Authentication (experimental)

This will allow you to have you user referential in LDAP (tested with base CentOS 5 openldap-servers). Your users need to be inetOrgPerson under ou=People,dc=my_org,dc=org Your GeoServer administrators need to belong to the cn=administrator,ou=Roles,dc=my_org,dc=org role:

dn: cn=administrator,ou=Roles,dc=my_org,dc=org
objectClass: top
objectClass: groupOfNames
cn: administrator
member: uid=mbaudier,ou=People,dc=my_org,dc=org

Other roles can be defined similarly under ou=Roles,dc=argeo,dc=org, and should be added mnaually when defining rules in GeoServer. You can of course adapt the following configuration with your specific LDAP settings.

Caveats:

  • the list of users won't be properly displayed in GeoServer.
  • as usual with autentication via HTTP make sure that users are using SSL (https://) when they authenticate, otherwise their credentials will be sent in clear. If you want to mix public with private data and stay compatible with client which don't support HTTPS, this is not necessarily easy.

Procedure:

  • Extract applicationContextSecurity.xml from the main-jar (in /var/lib/tomcat5/webapps/geoserver/WEB-INF/lib/)
  • Copy it to /var/lib/tomcat5/webapps/geoserver/WEB-INF/
  • Add the following at the beginning of the applicationContextSecurity.xml file (after the <beans> tag)
 <beans>
 	<bean id="initialDirContextFactory" class="org.acegisecurity.ldap.DefaultInitialDirContextFactory">
 		<constructor-arg value="ldap://my_ldap_server:389/dc=my_org,dc=org" />
 		<!--<property name="managerDn" value="mydomain\myuser" /> <property name="managerPassword" 
 			value="mypasswd" /> -->
 	</bean>
 
 	<bean id="userSearch" class="org.acegisecurity.ldap.search.FilterBasedLdapUserSearch">
 		<constructor-arg index="0">
 			<value>ou=People</value>
 		</constructor-arg>
 		<constructor-arg index="1">
 			<value>(uid={0})</value>
 		</constructor-arg>
 		<constructor-arg index="2">
 			<ref local="initialDirContextFactory" />
 		</constructor-arg>
 		<property name="searchSubtree">
 			<value>false</value>
 		</property>
 	</bean>
 	<bean id="ldapAuthenticationProvider"
 		class="org.acegisecurity.providers.ldap.LdapAuthenticationProvider">
 		<constructor-arg>
 			<bean
 				class="org.acegisecurity.providers.ldap.authenticator.BindAuthenticator">
 				<constructor-arg>
 					<ref local="initialDirContextFactory" />
 				</constructor-arg>
 				<property name="userSearch">
 					<ref local="userSearch" />
 				</property>
 			</bean>
 		</constructor-arg>
 		<constructor-arg>
 			<bean
 				class="org.acegisecurity.providers.ldap.populator.DefaultLdapAuthoritiesPopulator">
 				<constructor-arg>
 					<ref local="initialDirContextFactory" />
 				</constructor-arg>
 				<constructor-arg>
 					<value>ou=Roles</value>
 				</constructor-arg>
  				<property name="groupRoleAttribute">
 	 				<value>cn</value>
 				</property>
 				<property name="rolePrefix">
 					<value>ROLE_</value>
 				</property>
 				<property name="convertToUpperCase">
 					<value>true</value>
 				</property>
 			</bean>
 		</constructor-arg>
 	</bean>
  • Modify the following section
 ...
 	<bean id="authenticationManager" class="org.acegisecurity.providers.ProviderManager">
 		<property name="providers">
 			<list>
 				<ref local="ldapAuthenticationProvider" />
 				<!-- <ref local="daoAuthenticationProvider" /> -->
 ...
  • Modify /var/lib/tomcat5/webapps/geoserver/WEB-INF/web.xml to use WEB-INF/applicationSecurityContext.xml instead of classpath*:/applicationSecurityContext.xml
 ...
     <context-param>
         <param-name>contextConfigLocation</param-name>
         <param-value>classpath*:/applicationContext.xml WEB-INF/applicationSecurityContext.xml</param-value>
     </context-param>
 ...
  • Restart Tomcat
sudo /sbin/service tomcat5 restart

Thanks to http://jira.codehaus.org/browse/GEOS-3778 for the tip.

Historical Reference