Latest revision as of 01:10, 23 August 2014

Depecated: This page is not used any more. Instead we make use of Project Quickstarts for testing.

This page describes how to test each application installed on the Live GIS Disc. Application test steps describe how an Ubuntu user who is unfamiliar an application can try it out and confirm that everything has been installed correctly within 5 minutes. Test Results document when the application was last verified to be working.

This page is maintained at: http://wiki.osgeo.org/wiki/Live_GIS_Disc_Testing and copied onto each release of the LiveDVD.

Package testing matrix

Package testing status
Package Name	Latest Tested Against	Result
Boot and Installer	4.0rc6	Pass with issues
atlasstyler	4.0rc9	Pass with issues
deegree	4.0rc6	Pass with issues
geopublisher	4.0rc6	Pass with issues
geoserver	4.0rc6	Pass with issues
gvSIG	4.0rc6	Pass with issues
GDAL / OGR	4.0rc9	Pass
geomajas	4.0rc9	Pass
geonetwork	4.0rc6	Pass with issues
gpsdrive	4.0rc9	Pass
geokettle	4.0rc6	Pass
gmt	4.0rc9	FAIL
GRASS	4.0rc9	Pass with issues
kosmo	4.0rc6	Pass
mapnik	4.0rc6	Pass
maptiler	4.0rc9	Pass
marble	4.0rc9	Pass
mapfish	4.0rc6	Pass with issues
MapGuide	4.0rc6	Pass with issues
Mapbender	? 8 Aug 2010	Pass
mb-system	4.0rc9	FAIL
mapserver	4.0rc6	Pass
octave	4.0rc9	disabled
opencpn	4.0rc9	Pass
osm	4.0rc9	Pass
ossim	4.0rc9	Pass
osgearth	4.0rc9	Pass with issues
openjump	4.0rc9	Pass
postgis	4.0rc9	Pass
pgRouting	4.0rc6	Pass
qgis	4.0rc9	Pass with issues
QGIS Mapserver	4.0rc6	Pass
R	4.0rc9	Pass with issues
SAGA	4.0rc6	Pass
Sahana	4.0rc9	Pass
spatialite	4.0rc6	Pass with issues
uDig	4.0rc9	Pass
Ushahidi	4.0rc9	Pass
Viking	4.0rc9	Pass
ZOO Project	4.0rc9	Pass with issues
zyGrib	4.0rc9	Pass
main documentation	4.0rc6	Pass with issues
Windows Installers		none
Mac Installers		none
DVD burn (full)	4.0rc9	Pass
DVD burn (mini)		none
USB stick install (full)	4.0rc9	mixed
USB stick install (mini)		none
VM:VirtualBox	4.0rc9	Pass ?
VM:VMWare		none
VM:Qemu + KVM	4.0rc9	Pass with issues

Template

Tests written for: .package. [version], osgeo-live [version]
Test Description last updated: .date.

Steps

Ideally, steps will mimic the Quick Start documentation, so both can be tested at once. Otherwise, use following:

.action.

Verify that ...

Eg: From menu, select GeoSpatial->Application->Start

Eg: Verify that a browser opens at url: http://localhost:... and shows the application start page.

Update the wiki with test results (after these test steps)

Results from .date.

Run by: FirstName LastName

System: VMWare Player, 2Gig RAM, on ubuntu 9.0 base

Version: distribution version: eg: osgeo-live 4.0 rc6

Results: {{Pass}}, Pass with {{Issues}}, {{Fail}} (use curly-bracket template)

link to bug reports

Add more test results below, most recent results at the top

Boot and Installer

Steps

Ideally, steps will reference Quick Start documentation, otherwise use following:

. Straight up Live DVD Disk
. Installer (into a VM if that is easier to clean up after)
. Testing is performed offline

Verify that ...

. You arrive at the desktop
. Help opens
. Firefox opens up

Update the wiki with test results (after these test steps)

Results from August 6th

Run by: Jody Garnett

System: Thinkpad T43, 2 GB, on live dvd

System: Macbook Pro, 4 GB, on live dvd

System: VirtualBox, 1 GB, 30GB HD image, on windows 7

Version: distribution version: eg: osgeo-live 4.0 rc6

Results: Pass with issues

Bootloader

. shows version 3.0
. think pad boots fine
. mac needed to hit ENTER to get to the initial boot loading screen

Installer

. tried with vitural box vm
. install says "Arramagong live"
. obviously installing will allow you to enter a user name; will this break applications expecting "user" ?
. my install failed; not enough space on the device. Need instructions indicating how much space is needed

Desktop

. think pad displays fine
. macbook pro - test OSGeo LIVE DVD Barcelona is cut off (and this one has higher resolution than many laptops)
. virtual box - could not adjust the screen resolution beyond the initial 800x600, instructions for open-vm-tools were fine, oh wait it wants a reboot - of a live dvd?
. never did get virtual box to have a different screen resolution even after adding the open-vm-tools

Suggestions from IRC:

. change background to not have text
. text at bottom of desktop being cut off is probably a function of screen aspect ratio
. indicate that "user" is the password in a box or make it more visible (good idea jasonbirch)

link to bug reports

Results from August 7th, 2010

Run by: Angelos Tzotsos

System: VirtualBox 3.2, 1Gig RAM, on OpenSUSE 11.2

Version: osgeo-live 4.0 rc6

Results: Pass with issues

The DVD has label Arramagong Live 3.0
User name is asked for installation, but after first boot, automatic login can be selected.
Had to install vbox-additions in order to change screen resolution.

deegree

Tests written for: deegree 2.3 , osgeo-live 4.0

Steps: Run the QuickStart.

Results from August 6th

Switch to running Quick Start over previous 3.0 test steps. Things working as expected.

Run by: Cameron Shorter

System: Virtual Box on Ubuntu

Version: distribution version: eg: osgeo-live 4.0 rc6

Results: Pass

Results from August 6th

Run by: Jody Garnett

System: Thinkpad, 2 GB ram, live dvd

Version: distribution version: eg: osgeo-live 4.0 rc6

Results: Pass with test script issues

start deegree not on desktop; has been moved \u2026 into Web Services
running start deegree opens firefox; firefox is in offline mode and can't browse http://localhost:8081/
services are there
test WMS, test WFS or test WCS links are not there
generic client works
deegree logo tries to take me to the website (and I am not online); I would like to return to the initial start page?
deegree iPortal does not exist
super hard to tell if the service stopped

Results from August 7th, 2010

Run by: Angelos Tzotsos

System: VirtualBox 3.2, 1Gig RAM, on OpenSUSE 11.2

Version: osgeo-live 4.0 rc6

Results: Pass with issues

Firefox starts before Tomcat + deegree are up, throwing a "not found" page. The user needs to refresh.
iPortal: When changing from Utah theme to Salt Lake City theme, the overview window is not redrawn.

atlasstyler

Go to Geospatial ‣ Desktop GIS ‣ AtlasStyler.
Use the import buttons to either add ESRI Shapefiles oder PostGIS datasources to your project.
Click the tool-icon in the layer legend and select style. The main AtlasStyler dialog will open. While you change the style, the ‘automatic preview’ option at the bottom will render your changes on the fly.

Results from August 6th, 2010

Run by: Jody Garnett

System: Thinkpad T43, 2Gig RAM, on live dvd

Version: osgeo-live 4.0 rc6

Results: Atlas styler fail

Application is in "Education > Atlasstyler" (Not Science > Atlas Styler)
Quickstart is not specific enough; it is more a link to other docs
Application "window" is messed up; the window tilebar is folded up under the desktop bar; you can resise the window; but not move it.
Tried with natural_earth countries, a warning was provided that it would use the default style, progress bar is taking a long time
Oh wait the tutorials link to their website (I am offline); but the styling layers with SLD tutorials in french and english are actually included on the disk (verified both links work)
The application never came back to me; and the window issue result in a fail
darn I was looking forward to this one
figured out a workaround; clicking on task bar and asking the application to maximiz finally lets me get at the window tilebar
Whew was able to use "ps -ef | grep java" and "kill" to shut it down

Results from August 19th, 2010

Run by: H Bowman

System: Qemu+KVM on Debian/lenny amd64 host

Version: osgeo-live 4.0 rc9

Results: Pass with issues

worked fine for me with natural_earth countries, I had to lock the mouse within the VM window (ctrl-alt in Qemu-KVM) so I could alt-left-click-drag the Style window up enough to get at the Ok green check button in the bottom right. Otherwise very nice.

geopublisher

Run quickstart:

. http://download.osgeo.org/livedvd/4.0-rc6/osgeolive-docs/quickstart/geopublisher_quickstart.html

Go to applications->education-> and open Geopublishing documentation
- Verify that the green page from file:///usr/share/doc/geopublishing/index.html open in a browser
Scroll to the bottom and click the demo atlas.
Unzip it do your Desktop
Go to applications->education-> and start Geopublisher
Load the atlas.gpa from your Desktop/ChartDemoAtlas
- Verify that Geopublisher load the atlas. You should see a triparted GUI with a map-pool, data-pool and menu area.
Select File->Export and follow the wizard..
- export online and offline version of the atlas to a new directory Desktop/ChartAtlasExported
- When the export has finished, click the "open folder" button
- Close Geopublisher
Go into the Desktop/ChartAtlasExported/DISK folder and run start.sh
- Verify that an atlas opens
- Verify that you see a "Charts available" button at the top right
- Verify that clicking selecting the chart opens a chart window

Let that be the basic testing for Geopublisher now.

Results from August 6th, 2010

Run by: Jody Garnett

System: Thinkpad T43, 2Gig RAM, on live dvd

Version: osgeo-live 4.0 rc6

Results: GeoPublisher pass with issues

. Application > Education (not Science)
. You could just have the demo atlas link in the quickstart?
. I need a bit more advice no unzipping the demo atlas (firefox opened archive manager; but I think a picture is needed for those new to linux)
. Open Folder button did not work
. It is running and is very pretty

geoserver

Run quickstart: - http://download.osgeo.org/livedvd/4.0-rc6/osgeolive-docs/quickstart/geoserver_quickstart.html

Previous test definition:

Select the "Start GeoServer" icon.
Wait ~ 60 seconds for GeoServer to start.

Verify the GeoServer web page opens at http://localhost:8082/geoserver/web

In the firefox browser, click on "Layer Preview", wait ~ 30 secs

Verify you get a list of map layers

Select the 'OpenLayers' link on one of the layers (say the TOPP:States)

Verify you should see a web page with sample data in an interactive map

Results from August 6th,2010

Run by: Jody garnett

System: Thinkpad T43, 2Gig RAM, on live dvd

Version: osgeo-live 4.0 rc6

Results: Pass with issues

Quickstart document is not rendering correct; images rescale and text is pushed out of the way
Start GeoServer icon is not specific; it is in Web Services now; or in the Education menu (sigh!)
Nice progress bar as it starts up (who did that?)
Helpful having the start page link in the docs; but that new little progress bar opened the page for me
Suffers from the same "Firefox is in offline mode" error and cannot see local host (sent to email list)
No need to login if all you are doing is showing the layer preview
Warning is about the read-only file system; the live dvd provides this; so is this warning needed?
the directory needs to be /home/user/data/natural_earth (since the live dvd user name is "user" )
So adding a layer was fine; the sectino for adding the style to the layer is empty

Results from August 7th, 2010

Run by: Angelos Tzotsos

System: VirtualBox 3.2, 1Gig RAM, on OpenSUSE 11.2

Version: osgeo-live 4.0 rc6

Results: Pass

Embeded GeoWebCache WMS TMS document throws an error.
Quickstart: the path to find the data is /usr/lib/geoserver-2.0.2/data_dir/data instead of /usr/lib/geotools-2.0.2/data_dir/data

gvSIG

Go to applications->education and start gvSIG

Verify that gvSIG starts correctly

Create a new view and add some shapefiles from /usr/local/share/mapserver/demos/itasca/data

Verify that the shapefiles are correctly added to the view

Create a new view and add any of the two TIFF files from /usr/local/share/mapserver/demos/itasca/data

Verify that the raster files are correctly loaded to the view

If you have Internet access, try to add a WMS layer from the combo list (i.e. the NASA JPL server)

Verify that a WMS layer can be accessed

Open the sample project included in the LiveDVD at /usr/local/share/gisvm/app-data/gvsig/sample-project.gvp

Verify the project loads all the data and layouts configured are available.

You can also try to access any of the other data available from the LiveDVD like the PostGIS Data, or WxS services by the map servers configured

This tests are related with the correct functioning of the other software installed on the LiveDVD

Update the wiki with test results (after these test steps)

Results from 6 Aug 2010

Run by: Christian Willmes

System: Virtualbox 3.2, 2048MB RAM, on Ubuntu 10.4

Version: distribution version: OSGeoLive-v4-rc6.7z

Results: pass with path issues to sample project

Programm runs fine, but on opening the sample project from /usr/local/share/gisvm/app-data/gvsig/sample-project.gvp, a file not found / Invalid path to "/home/user/data/openjump/data/departement22.shp" and the same message to a lot of other files in that directory comes up.

gdal / ogr

Steps

Open a terminal

 ogrinfo --formats
 gdalinfo --formats

 ogrinfo data/natural_earth/10m_ocean.shp
 gdalinfo /usr/share/osgearth/data/terrain/mt_rainier_90m.tif

Results from August 7th, 2010

Run by: Angelos Tzotsos

System: VirtualBox 3.2, 1Gig RAM, on OpenSUSE 11.2

Version: osgeo-live 4.0 rc6

Results: Pass

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny amd64

Version: osgeo-live 4.0 rc9

Results: Pass

geomajas

Click desktop icon "Browser Clients" → "Start Geomajas" which will start the Geomajas startup script. This will in turn start up a Tomcat server.

Verify that Firefox opens a new tab at the page http://localhost:3420/showcase/

Test instructions are out of date ...

~~Click on the "Start demo!" link for the Attributes & Features demo.~~
~~Verify that a sample demo page has opened with an application, showing the provinces of Belgium.~~
~~Doubleclick on one of the rows in the attribute table bottom right.~~
~~Verify that a floating window appears, showing the rows' contents in more detail.~~

Click on the desktop icon "Browser Clients" → "Stop Geomajas".

Verify that the Tomcat server that runs Geomajas has stopped.

This can be done by refreshing the page. Firefox should give a warning that it is unable to connect.

Results from 9 March 2010

Run by: Pieter De Graef

System: Virtualbox, ~512MB RAM, on Windows XP

Version: distribution version: osgeo-live-3.0rc2

Results: Pass

Results from 6 Aug 2010

Run by: Christian Willmes

System: Virtualbox 3.2, 2048MB RAM, on Ubuntu 10.4

Version: distribution version: OSGeoLive-v4-rc6.7z

Results: fail

After starting 'start Geomajas' in the Browser Clients folder Firefox opens URL "http://localhost:3420/showcase/", which is a 404 Page delivered by Jetty.

Results from August 8th, 2010

Run by: Angelos Tzotsos

System: VirtualBox 3.2, 1Gig RAM, on OpenSUSE 11.2

Version: osgeo-live 4.0 rc6

Results: Fail

The link http://localhost:3420/geomajas-tutorial/applications/tutorial/html/ does not work after start-up

Results from 19 Aug 2010

Run by: H Bowman

System: Qemu+KVM on a Debian/Lenny amd64 host

Version: distribution version: osgeo-live-3.0rc9

Results: Pass

Test instructions are all out of date, but playing around with the showcase/ all seems to work ok.

geonetwork

Click icon "Start Geonetwork" - wait until the server intializes (see load graph in the upper right hand corner)
open FireFox http://localhost:8880
you should see a list of active URLs, choose /geonetwork
Search for "river"

Verify a list of metadata records are returned

Results from 10 August 2010

Run by: Cameron Shorter

System: VirtualBox, 2Gig RAM, on ubuntu 10.04 base

Version: osgeo-live 4.0 rc6

Results: Pass with issues

GeoNetwork doesn't have a script which opens up a web browser (like GeoServer)
GeoNetwork still calls the old Project Description file.

Results from August 8th, 2010

Run by: Angelos Tzotsos

System: VirtualBox 3.2, 1Gig RAM, on OpenSUSE 11.2

Version: osgeo-live 4.0 rc6

Results: Pass

gpsdrive

(copied from install_gpsdrive.sh)
More details in the on-disc help page

Testing

If no GPS is plugged in

Double click on the GpsDrive desktop icon
You should see a map of downtown Barcelona, after about 10 seconds a waypoint marker for the Convention Centre should appear.
Set the map scale to 1:150,000 either by dragging the slider at the bottom or by using the +,- buttons (not magnifying glass). After a moment you should see all 3 FOSS4G 2010 venues.
Enter Explore Mode by pressing the "e" key or in the Map Control button.
Use the arrow keys or left mouse button to move off screen.
Try clicking on the Workshop venue and mouse-wheel to zoom in on it
Right click to set destination and leave Explore Mode

Click on the "Find" button on the left
Set "maximum distance" to 1.0 km
Click the POI-Types drop down menu and select Food \u2192 Restaurant \u2192 Restaurant
Click the Find button in the top right
Click on the nearest restaurant, and "Select Target" in the bottom right
Make your way there and enjoy a nice meal

Downloading maps

Change the scale setting to 1:1,000,000 you should see the limits of the PostGIS/Mapnik/OpenStreetMaps road database for the conference area.
Click the "Map Control" button on the left hand side, and turn off Mapnik Mode.

You should now see a continental image

Enter Explore Mode again ("e") and left click on an island in the Med
In the top-left menu, pick Options \u2192 Map \u2192 Download
- Map source: NASA LANDSAT, Scale: 1:500,000, [Download Map]
- When download is complete click [ok] then change the preferred scale slider to 1:500,000
- This will be of more use in remote areas.
Explore to the coast, click on an airport, headland, or some other conspicuous feature. You might want to use the magnifying glass buttons to zoom in on it better. Use a right click set the target on some other conspicuous feature nearby then demagnify back out.
Options -> Map -> Download
- Map source: OpenStreetMap, Scale: 1:40,000, left-click on map to center the green preview over your target and what looks like a populated area.
- [Download Map]
- When download is complete click [ok] then change the preferred scale slider to 1:40,000 and you should see a road map. This will be more interesting in built up areas.

Overlay a GPX track

If you have a GPX track file lying around ...
Options -> Import -> GPX track
Hidden folders are hidden in the file picker, but just start typing ~/.gpsdrive and hit enter. You should then see the tracks/ directory and be able to load
A red trace should appear

If a GPS is plugged in

Make sure gpsd is running by starting "xgps" from the command line.
The program will automatically detect gpsd and jump to your current position. This should bring up a continental map as you won't have any map tiles downloaded for your area yet. (you may want to switch out of Mapnik Mode in the Map Control window)
See the above "Downloading Maps" section to get some local tiles.
If you have a local GPX track of some roads try loading that and making sure everything lines up, as detailed in the above "Overlay a GPX track" section.

That's it.

Results from Aug 2010

Run by: Cameron Shorter

System: Virtual Box on Ubuntu 10.04

Version: osgeo-live 4.0 rc6

Results: Pass

Results from 18 Aug 2010

Run by: H Bowman

System: Qemu-KVM on Debian Lenny

Version: osgeo-live 4.0 rc9

Results: Pass

geokettle

Tests written for: geokettle 3.2.0-20090609, osgeo-live 4.0-rc6
Test Description last updated: August 8th, 2010

Steps

Launch GeoKettle.

Verify you get a window prompting you to select a repository.

On the "Select a repository" dialog, choose "No repository".

Verify the GeoKettle application is opened.

Close any startup tips dialog.
Select File-> Open
Select /opt/geokettle/samples/transformations/geokettle/intersection.ktr

Verify you see the "intersection" transformation in the work area, with a big yellow comment box and some step icons.

Run the transformation in preview mode
- Select Transformation menu -> Preview
- Choose the "Intersecting rows" step (to view the rows that are outputted by that step)
- then click on Quick Launch.

Verify you see the result in the "Examine preview data" dialog (two rows with four columns: GEOM1_ID, geom1, GEOM2_ID, geom2. The geom1 and geom2 fields should contain MULTIPOLYGON WKT geometries).

Results from August 8th, 2010

Run by: Thierry Badard

System: VirtualBox 3.1, 2Gig RAM, on ubuntu 10.04 base

Version: osgeo-live 4.0 rc6

Results: Pass

gmt

There are 29 example jobs built in, and a script to run them all:

Open a terminal

cp -r /usr/share/doc/gmt-examples/examples/ gmt-examples
cd gmt-examples/
./do_examples.sh

[whiz .. bang .. whirl]

View results using ghostscript in the ex*/*ps directories

Eg:

gs ex02/example_02.ps

Results from 2010-08-06

Run by: Cameron Shorter

System: Live DVD booted from ISO in a VM, 512Meg RAM

Version: osgeo-live 4.0 rc6

Results: Pass (fixed test steps)

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny

Version: osgeo-live 4.0 rc9

Results: FAIL (trac #627)

grass

Double click on the GRASS desktop icon

Verify you see a slick "Welcome to GRASS" GUI

Select Spearfish60 for location, User1 for mapset
Click on [Start Grass]
In the Layer Manager GUI window add a raster layer
- On the toolbar click the icon with a + and a checkerboard
- On map to be displayed pull down the list and select elevation.dem
from the PERMANENT mapset and click [ok]
In the Layer Manager GUI window add a vector layer
- On the toolbar click the icon with a + and a "V" line
- For input map name pull down the list and select roads from the PERMANENT mapset and click [ok]
Over in the Map Display window toolbar click on the eyeball icon to render

Verify you see the maps displayed

See also

http://trac.osgeo.org/grass/wiki/HowToTestGrass6

(North Carolina dataset is already installed in grassdata/)

More details in the on-disc help page
http://grass.osgeo.org/grass64/manuals/html64_user/helptext.html

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Pass

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny

Version: osgeo-live 4.0 rc9

Results: Pass with issues (OpenGL NVIZ wonky in a VM)

kosmo

Tests written for: Kosmo Desktop 2.0, osgeo-live 4.0
Test Description last updated: August 10th, 2010

Steps
Theming layer with PostGIS backend

Select Desktop GIS > Kosmo from the desktop in order to start Kosmo Desktop
In the welcome dialog, select the option "With a new view" inside the "Create a new project" panel and click Ok
In the "Spatial Reference System selection" dialog, press the "..." button in order to select the view SRS
Select "EPSG" as Type
Enter 4236 in the textfield and click "Search" button; select the CRS given and click the Ok button
Click Ok again to set EPSG:4236 as the current view projection
In the main menu "View", select the option "Load Dataset..."
Select as Format -> "Database" (at the top-left corner) and "PostGIS" as database type
Enter Database Name': osm_local User Name'Password: user and click the "Connect" button
Scroll down, check the box to the left of public.planet_osm_roads and click the Ok button
Select the 'planet_osm_roads' layer at left under 'Working' and click the checkbox to make it visible
Right-click on the 'planet_osm_roads' layer and choose Simbology > Change Styles...
Select the "Colour Theming" tab; click the "Enable colour theming" checkbox
Choose Attribute => highway and click the Ok button to apply the changes
You should see the local OSM roads coloured by attribute in the map

Shapefile and image loading

Select Desktop GIS > Kosmo from the desktop in order to start Kosmo - Desktop
In the welcome dialog, select the option "With a new view" inside the "Create a new project" panel and click Ok
Repeat the steps described in the test "Layer Theme with PostGIS backend" to select the task projection
In the main menu "View", select the option "Load Dataset..."
Select as Format -> "Image file" and navigate to /home/user/data/natural_earth/ (or data/natural_earth/ if it starts at the home/user directory)
Select the directory "HYP_50M_SR_W" in order to load all the tiffs inside it as a mosaic and press the Ok button
Select the HYP_50M_SR_W layer at left under 'Working' and click the checkbox to make it visible
Select as Format -> "Shapefile"
Select the "10m_populated_places_simple.shp" and "10m_ocean.shp" files and press the Ok button in order to load them
Check that both shapefiles have been loaded on the layer tree at the left. Make them visible by clicking on the checkbox of each one

Results from 2010-08-10

Run by: Sergio Baños

System: VMBox Player, 4Gig RAM, on Windows Vista

Version: distribution version: osgeo-live 4.0 rc6

Results: Pass

mapnik

see file:///usr/local/share/livedvd-docs/doc/mapnik_description.html Mapnik Description

http://live.osgeo.org/doc/mapnik_description.html

--this may be 6 months old, try the on-disk quickstart instead --HB

Results from 2010-08-06

Run by: Cameron Shorter

System: Live DVD, in VirtualBox Virtual Machine

Version: osgeo-live 4.0 rc6

Results: Pass

maptiler

you need an GeoTIFF or other raster geodata to test the functionality.

For example /usr/local/share/maptiler/utm.tif

start MapTiler: click on Geospatial → Spatial tools → "MapTiler"
in the MapTiler application select on the first page "Google Maps compatible" tiles and click "Continue"
in the second page of wizard add the tiff, it should be /usr/local/share/maptiler/utm.tif and click "Continue"
continue trough all other steps in the wizard (default options are fine) and then start "Render"
when the rendering is finished you will see a link to the directory with tiles, click to open it (it opens in Firefox as a directory)
open the "googlemaps.html", you should see a black&white overlay displayed on top of Google Maps hybrid layer. You can also open "openlayers.html" to see another presentation of the results.

Verify that ...

MapTiler application starts without problems when clicked on the icon
When you press on "Render" applications starts the processing and does not report any error.

Alternative "real" geodata for testing are for example USGS maps or NOAA RNCs.

Another way to try it:

Start MapTiler by clicking the icon on the Desktop
Load in the second step example raster GEODATA (with georeference/srs)
Go through all the steps with 'Next' up to the Render
Once the render is finished you can click in the GUI to open a folder with tiles. When you open googlemaps.html or openlayers.html then you see your geodata warped to the overlay of popular interactive web maps as Google Maps.

The map tiles are displayed directly from your disk. To publish the map to Internet just upload the folder with tiles to any webserver or Amazon S3"

Results from 2010-08-19

Run by: H Bowman

System: Qemu+KVM on Debian/Lenny amd64 host

Version: osgeo-live 4.0 rc9

Results: Pass

updated test instructs to reference on-disc geotiff source

marble

Click on the desktop icon
If you have used Google Earth before you should be able to figure this one out without much difficulty.
In the Settings menu select full-screen mode
Explore ...
In the bottom-left corner of the program window there is a subtle tab called "Map View". Click on it.
Select another map (e.g. 'Precipitation (July)')
Explore some more ...

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Pass

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny

Version: osgeo-live 4.0 rc9

Results: Pass

mapfish

Steps

Make sure you have a working internet connection
Double click on the Mapfish icon on the desktop

Verify that a browser opens after a few seconds showing a map of the southwestern pacific

Click the magnifying glass just under the word "Map" at the top of the map.
Zoom in on Sydney
Explore

Results from August 8th, 2010

Run by: Angelos Tzotsos

System: VirtualBox 3.2, 1Gig RAM, on OpenSUSE 11.2

Version: osgeo-live 4.0 rc6

Results: Pass with issues

Mapfish start-up script fails to start.
Cameron Shorter: I can reproduce this problem when starting up with the Disc is not connected to the internet, and Firefox is in Offline mode. It starts up fine when connected to the internet.

MapGuide Open Source

Tests written for: MapGuide Open Source 2.2.0, LiveDVD 4.0
Test Description last updated: June 26, 2010
Steps

Start LiveDVD and log in as "user"

Verify presence of "Start MapGuide", "Stop MapGuide", and "MapGuide Maestro" desktop icons

Double click "Start MapGuide" desktop icon and enter "user" password if prompted

Verify that "Starting MapGuide" and "Starting Apache" messages appear

Open a browser window to http://localhost:8008/mapguide/phpviewersample/ajaxviewersample.php

Verify that a map is displayed in the center of the screen with a layer legend to the left of the map and an application "Overview" pane to the right of the map.

Zoom into street level detail and click the pointer icon. Select a parcel.

Verify that a parcel is selected in blue.

On the right hand side of the page, click "Tasks" then "Buffer". Set the distance to 20 meters and click "Done"

Verify that a red buffer zone appears around the parcel.

Close the browser and double click the "MapGuide Maestro" desktop icon. Login to "http://localhost:8008/mapguide/mapagent/mapagent.fcgi" as user "Administrator" and password "admin".

Verify that the tree view contains "Samples/Sheboygan".

Update the wiki with test results (after these test steps)

Results from August 5, 2010

Run by: Trevor Wekel

System: VMware ESX 4.1, 16GB RAM

Version: LiveDVD 4.0 RC 6

Results: Pass with minor issue - the project overview is missing. Cameron has already fixed it.

link to bug reports

Results from 6 Aug 2010

Run by: Christian Willmes

System: Virtualbox 3.2, 2048MB RAM, on Ubuntu 10.4

Version: distribution version: OSGeoLive-v4-rc6.7z

Results: pass with minor issue

The MapGuide Maestro points to the URL without the 8008 port after localhost, which results in an error, if the user does not fix this in the URL himself.

Mapbender

Tests written for: Mapbender 2.6.1, OSGeo LiveDVD 4.0
Test Description last updated: 5. July 2010
Steps

make sure that you have a working internet connection
make sure that your Apache and PostgreSQL is running

double click on the Mapbender icon on the desktop or browse to http://localhost/mapbender/

Verify that a browser opens after a few seconds showing the Mapbender login-page

login with user root / password root

Verify that the list of the available applications appears

choose application named "gui" with a click on the name

verify that the application "gui" opens and that you see a Mapbender application with the demis-world WMS, a germany WMS and a mapbender-user WMS

Update the wiki with test results (after these test steps)

Results from 5.7.2010

Run by: Astrid Emde

System: VirtualBox, 2Gig RAM, on ubuntu 8.10

Version: Mapbender 2.6.1, just ran ./install_postgis.sh and ./install_mapbender.sh

Results: Fail

I ran ./install_postgis.sh and ./install_mapbender.sh - When I started Mapbender the ALIAS was not created. After restart the Mapbender could be used without problem, login succeded

Result

next test will be run with the osgeolive 4.0 rc

test results from 23.7.2010

Run by: Marc Manns

System: VirtualBox, 2Gig RAM, on ubuntu 8.10

Version: OSGeoLIve beta2 Mapbender 2.6.1

Results: Pass with issues

create user/group
create application
register new WMS
customize tree
add WMSFromFilteredList
change language in [Mapbender.conf] to german

suggestion: There is a password.txt at the desktop. I think, we should add our root/root authentication to it. -> done --astroide 09:28, 23 July 2010 (UTC)

Result

the Mapbender applications handling worked fine

test results from 8.8.2010

Run by: Astrid Emde

System: VirtualBox, 2Gig RAM, on ubuntu 8.10

Version: OSGeoLIve rc6 Mapbender 2.6.2

Results: Passed

create gui
create application
register new WMS
print

Result

the Mapbender applications handling worked fine

Add more test results below, most recent results at the top

mb-system

Open a terminal

cd /usr/local/mbsystem/examples/

List summary information about the contents of some bathymetric data files:

cd mbinfo/
./mbinfo.cmd

Grid some sample data and then view it:

cd ../mbm_plot/
./mbm_plot_5.cmd

# which creates this script:
./mbm_plot_test5.cmd

You should now see a nice plot of the seafloor off Baja California.

(this also acts as a test of the GMT plotting package)

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Pass

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny

Version: osgeo-live 4.0 rc9

Results: FAIL (trac #627)

mapserver

Tests written for: MapServer 5.6.3, OSGeo LiveDVD 4.0
Test Description last updated: 30 June 2010
Steps

Select the "MapServer" icon.
Wait a few seconds for FireFox to start.

Verify the MapServer web page opens at file:///usr/local/share/livedvd-docs/doc/mapserver_description.html

In the firefox browser, scroll down to "MapServer Demo" section and click on "Itasca".

Select "Basic Application" and click on "Initialize".

Verify you get a map.

Select the "Query multiple features" tool on the right of the page and click somewhere on the map.

Verify you get a list of features.

THE GMAP DEMO HAS BEEN REMOVE IN 4.0 ALPHA4, IT IS NOT YET COMPATIBLE WITH PHP 5.3 ~~Return to the the initial MapServer web page, file:///usr/local/share/livedvd-docs/doc/mapserver_description.html , scroll down to "MapServer Demo" section and click on "GMap".~~

~~Verify you get a map and a legend with icons rendered.~~

Return to the the initial MapServer web page, file:///usr/local/share/livedvd-docs/doc/mapserver_description.html on the initial MapServer web page, scroll down to "MapServer Documentation" section.

Verify that the documentation version is appropriate versus the MapServer version.

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Pass with issues

All good, documentation link needs to be updated ( says 5.4.2 instead of 5.6, ) but docs themselves seem up to date

Results from 2010-08-06

Run by: Daniel Morissette

System: Live DVD on Acer AST180 desktop (AMD Athlon X2 64, 3GB RAM)

Version: osgeo-live 4.0 rc6

Results: Pass with issues

Itasca demo (and mapserv 5.6.5) work fine
Problems in mapserver_description.html
- Need to remove "GMap" demo link (since GMap itself has been removed)
- Need to update Documentation link to read "MapServer 5.6 Documentation" or even better: "MapServer Documentation" (with no version number so we don't need to update it in the future)
- The main page of the MapServer 5.6 Docs that's on the DVD is from 5.6.3, and the OSM map in that page does not work: the link to the tiles point to a dead server. This is a known issue and the current version of the docs on the MapServer website (v5.6.5) have the map disabled... so it may be a good idea to grab the latest version of the 5.6 docs for the DVD.

Results from August 7th, 2010

Run by: Angelos Tzotsos

System: VirtualBox 3.2, 1Gig RAM, on OpenSUSE 11.2

Version: osgeo-live 4.0 rc6

Results: Pass

"GMap" demo link needs to be removed

octave

Open a terminal
Start program by typing "octave" at the prompt

% Which way to Barcelona from Sydney?
sydney = [-33.8750 151.2005]
barcelona = [41+23/60 2+11/60]

dirn = azimuth(sydney, barcelona);
deg_symb = 176;
disp(['Heading: ' num2str(dirn) deg_symb])

% How far's the trip? (roughly!)
system('proj -le')
wgs84_a = 6378137.0  % major radius of the Earth, in meters
dist_deg = distance(sydney, barcelona)
dist_meters = pi * wgs84_a * (dist_deg / 360.0)
disp(['Distance: ' num2str(dist_meters / 1000) ' km'])

Type "exit" to quit.

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Pass

Results from 2010-08-18

Run by: H Bowman

Version: osgeo-live 4.0 rc9

Results: Script disabled to save space on the DVD

opencpn

Activate data

Open a terminal
Type "opencpn_noaa_agreement.sh" at the prompt

Run program

(assuming your GPS is not plugged in and gpsd is not running)

Double click the OpenCPN icon on the desktop or type "opencpn" at a terminal
- on startup it asks where to find the charts. in the preferences window click in the Charts tab, click on the charts directory, click on [Add Selection], and tick "Force Full Database Rebuild" at the bottom.
Left-click recenters the view
Left-click-drag pans the view
Mouse-wheel zooms in/out
The blue bars in the bottom show previews of overlapping raster maps and clicking on them switches to them. The green buttons switch to vectorial charts.
Right click on the map canvas to get a menu, select "Go to here".
At this point if you have your auto-pilot interfaced GPS plugged in you should feel your boat/airplane change course. If not, you'll see a red arrow and the destination target blinking anyway but will have make your own arrangements for getting there.

More details in the on-disc help page: and specifically the Getting Started help page.

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Pass

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny amd64

Version: osgeo-live 4.0 rc9

Results: Pass

osm

JOSM

File \u2192 Open \u2192 /home/user/data/osm/feature_city.osm.bz2
Left-click drag a box around some data
Type "3" to zoom to the box.
Rinse and repeat
Mouse wheel to zoom in further
Right-click drag to pan
Click on a road to see some info

Merkaartor

Start it up from the Navigation and Maps menu
Click the "Download" button at the top left
Zoom in on Mataro just to the north of Barcelona (or anywhere) until one zoom level past where you can read the street names, and click [ok] to start the download

(download map: Left-click-drag to pan, mouse wheel to zoom)

After it finishes, click on "Download more"

Click on a road, see its attributes come up
now it's Right-click-drag to pan, mouse wheel to zoom
In the Layers list in the top-left right-click on "Map - None" and select "Yahoo!"
Click the little box to the left of "Map - Yahoo!" to enable the eyeball
Behold the satellite image underlay

Osmarender

Open up Merkaartor again
When satellite image comes up, click the "Download More" button
Once the streets come up do File \u2192 Export \u2192 OSM (XML)
Select "All visible", filename ~/test.osm
Quit Merkaartor
Open a terminal, then:

osmarender test.osm

[whiz-bang-whirl]

After some time it should finish leaving a test.svg file behind
Open the test.svg file in Inkscape or Firefox to view

inkscape test.svg

In inkscape it's middle-click-drag to pan, "+" key to zoom in
In Firefox use Ctrl-+ to zoom in

Gosmore

Open a terminal
Import data with:

bzip2 -dc /usr/local/share/osm/Barcelona.osm.bz2 | gosmore rebuild

Click on the "-" in the bottom-right of the map canvas until you see the city, then left click to center on downtown, mouse wheel up to zoom in
That's about it!

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Pass with issues

Map didn't render to scale where I could find any roads. Probably because I'm not connected to network. Apps loaded up fine though

-- which app are you talking about? net connection should not be needed as we supply data in Barcelona.osm. for Merkaartor you need to un-bzip2 it first, see the quickstart for details. --HB

Cameron Shorter: I ran Merkaartor with network connected, and the application was able to download date, and confirmed that when running Merkaartor offline, there was an error, the download of date timed out.

-- ... you can't download without somewhere to download from. De-bzip2 the sample data and play with that instead. --HB

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny amd64

Version: osgeo-live 4.0 rc9

Results: Pass

ossim

Tests written for: ossim 1.8, osgeo-live 4.0
Test Description last updated: 2010-08-08

Run the steps in the quickstart guide

http://download.osgeo.org/livedvd/4.0-rc7/osgeolive-docs/quickstart/ossim_quickstart.html

Remark: OssimPlanet requires OpenGL support, which might not be available on virtualized environments.

Script replaced in 4.0rc8.

Results from 2010-08-06

~~Run by: Myles Kenihan~~

~~System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM~~

~~Version: osgeo-live 4.0 rc6~~

~~Results: Pass with issues~~

Data is stored in /home/user/ossim. It should be in /home/user/data/ossim directory.

~~The toolbar on ImageLinker flickers as if the toolbar is scrolling up/down/up/down as fast as it can. Possibly due to running in a small window 600x800.~~

Results from 2010-08-04

~~Run by: Pirmin Kalberer~~

~~System: KVM~~

~~Version: osgeo-live 4.0 rc6~~

~~Results: Pass~~

Results from 2010-08-19

Run by: H Bowman

System: Qemu+KVM on amd64 Debian/Lenny, physical boot from LiveDVD burn

Version: osgeo-live 4.0 rc9

Results: Pass

OssimPlanet did not work on VM, as expected, as OpenGL is no-go. Worked fine from physical DVD boot though.

osgearth

Tests written for: osgearth 1.3, osgeo-live 4.0
Test Description last updated: 2010-08-08

Run the steps in the quickstart guide [LINK PLEASE]

http://download.osgeo.org/livedvd/4.0-rc7/osgeolive-docs/quickstart/osgearth_quickstart.html

Result

You should see a globe with different overlays. Remark: OpenGL support is required, which might not be available on virtualized environments.

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Fail

command failed. Directory share/osgearth/maps/ does not exist
Cameron Shorter: The following error message occurred:

> osgeoearth_simple 50 50 900 700
[osgEarth::TMS] Error reading TileMap and no overrides set
[osgEarth::MapLayer] Could not initialize TileSource for layer

Results from 2010-08-04

Run by: Pirmin Kalberer

System: KVM

Version: osgeo-live 4.0 rc6

Results: Pass

Results from 2010-08-19

Run by: H Bowman

System: Qemu-KVM with X tunneled over ssh; physical LiveDVD

Version: osgeo-live 4.0 rc9

Results: Pass with issues

KVM doesn't like OpenGL, so no luck there. Quickstart should mention that it may not like VMs.
On the LiveDVD burn it was good though, but of course a network connection was needed which should be mentioned in the quickstart
A *.desktop file should be written for the simple Blue Marble example to help get folks started/help exposure. (bundle next to Marble)
All in all, a very nice app!

openjump

Layer Theme with PostGIS backend

Open OpenJUMP
under the File menu select 'Open...'
select Data Store Layer
on the Connection line, click on the database icon (far right)
click on Add
enter Name: osm_local Server: localhost Port: 5432 Instance: osm_local User: user Password: user
click OK; click OK in the parent dialog box; you should be back in the Data Store Layer dialog
from the Dataset: menu choose 'planet_osm_roads'; click Finish
select the planet_osm_roads layer at left under 'Working'
click on the Palette Icon in the menu bar
select the 'Colour Theming' tab; click 'Enable colour theming' checkbox
choose Attribute → admin_level
choose a colour theme (e.g. Pastel 2 from Colorbrewer); click 'OK' to dismiss the dialog
you should see the roads in various colours

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Fail

Open Jump started but database 'medford' doesn't exist

--test is out of date; run "psql -l" to list current installed PostGIS databases. --HB

Results from 2010-08-19

Run by: H Bowman

System: Qemu+KVM, on debian/lenny amd64 host

Version: osgeo-live 4.0 rc9

Results: Pass

(testing method updated to not use OSM db instead of medford)

postgis

Spatial Query with the Graphical Query Builder helper

Open PGAdmin III from the Development menu
double-click on 'local'
under Databases, double-click on natural_earth
open 'schemas'
open 'public'
select 'Tables', click on the 'Execute SQL' Icon above (it has a pencil in it)
expand the window and click on 'Graphical Query Builder'
open 'Schemas', double-click on 'public'
instructs out of date

click and drag 'medford_wards' to the work area on the right

click and drag 'jacksonco_schools' to the work area on the right

choose 'jacksonco_schools' name, address, city and students

choose 'medford_wards' council_me (meaning council members)

click and drag from the_geom in 'medford_wards' to the_geom in 'jacksonco_schools' (you should see a solid line form with an '=' in it)

click on the 'SQL Editor' tab above, to navigate away from the Graphical Query Builder

edit the WHERE line to say
~~ST_Contains( medford_wards.the_geom, jacksonco_schools.the_geom )~~
~~add an additional line~~
~~ORDER BY medford_wards.council_me, jacksonco_schools.students DESC;~~
the entire query ends with one semicolon ';'

click on the 'execute query' icon above (a green triangle pointing to the right) you should see a list of council districts, schools, school sizes and the names of council members for each district as a result

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Pass with issues

database 'medford' doesn't exist

--test docs are out of date. run "psql -l" to list currently installed databases. --HB

Cameron Shorter: test steps need to be updated to use naturalearth dataset, but otherwise this application is working fine.

Results from 2010-08-19

Run by: H Bowman

System: Qemu+KVM on Debian/Lenny amd64 host

Version: osgeo-live 4.0 rc9

Results: Pass

database 'medford' used in test instructions doesn't exist, but plenty of evidence that all is ok via GpsDrive live rendering, QGIS browsing, etc.

pgRouting

Follow pgRouting Quick Start documentation, and confirm you get results described.

[link please]

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Pass

qgis

open GeoTiff

Layer \u2192 Add raster layer
Select /home/user/data/natural_earth/HYP_50M_SR_W/HYP_50M_SR_W.tif
click [Open] and a world map should arrive
zoom, pan, etc

open Shapefile

Layer \u2192 Add vector layer
Select [Browse] then /home/user/data/natural_earth/10m_land.shp
click [Open] and a world map should arrive
click the arrow with a blue "i" button (top middle) for query tool
click on a feature to identify it

cleanup: File \u2192 New Project, then [discard]

open PostGIS data I

From the menu: Layer \u2192 Add PostGIS Layer ...
PostgreSQL Connections: [New]

    Name: natural_earth
    Host: localhost
    Database: natural_earth
    Port: 5432
    SSL Mode: allow
    username: user
    password: user

[Test Connect] should show success
click [ok]
click [connect], a list of layers should appear
select 10m rivers, lakes, and land layers
click [Add]
view selected data, drag 10m_land to bottom of layer list so it does not obscure other layers

cleanup: File \u2192 New Project, then [discard]

open PostGIS data II

(run the PostGIS test first so that the osm_barcelona DB exists!; if not, just set the database name as "osm_local" which is already there)

From the menu: Layer \u2192 Add PostGIS Layer ...
PostgreSQL Connections: [New]

Name: ________ "OpenStreetMap Import"
Database: ____ "osm_barcelona"

Click on [Test Connect], with luck you will get a message that the connection to the database was successful.
Click [Ok] to close the New Database window.
Click on [Connect] in the top left of the Add PostGIS Table window. You should see a listing of tables come up.
Click on all of the table names to highlight them.
Click on [Add] at the bottom.
After some moments you should see the data displayed in the main map canvas.
Zoom, pan, query as you like. Drag layer names up and down in the left-pane list to change their position in the stack.

This should at least prove to you that the database is correctly populated and running.

open OSM data

Plugins \u2192 Manage plugins
in the filter at the top type "openst"
tick the OSM plugin and click [ok], a set of new buttons should appear

In a terminal shell you'll have to uncompress the .osm file

cp data/osm/feature_city.osm.bz2 local.osm.bz2
bzip2 -d local.osm.bz2

Plugins \u2192 OpenStreetMap \u2192 Load OSM from file
Select the ~/local.osm file
Tick all boxes and click [ok], layers should appear in layer list on left
Right click on a layer in the layer list and Zoom to layer extent
zoom, pan, etc.
In the top-left of the right pane depress the blue-i Info button, move mouse over map

cleanup: File \u2192 New Project, [discard]

Test the GRASS plugin

Plugins \u2192 Manage plugins
in the filter at the top type "grass"
tick the GRASS plugin and click [ok], a set of new buttons should appear
Plugins \u2192 GRASS \u2192 Open Mapset

gisdbase: /home/user/grassdata
location: spearfish60
mapset: user1

Plugins \u2192 GRASS \u2192 Open GRASS tools

Config \u2192 g.region.multiple.raster

mapname: elevation.dem [run]

Raster \u2192 Surface Management \u2192 Generate surface \u2192 r.surf.fractal
[Run]

QGIS bug: wants user to own the PERMANENT mapset even if it isn't open! :-(

---

click "Add GRASS raster layer" button, select "elevation" map

click "Add GRASS raster layer" button, select "elevation_shade" map

click right mouse button in legend on "elevation_shade" map, move transparency to 40%

click "Add GRASS vector layer" button, select "roadsmajor" map, select layer "1-line" (level 1 is the topological level), OK

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Fail

Problem with settings, says database medford does not exist

test docs are out of date. run "psql -l" to list currently installed PostGIS databases. --HB

Results from August 8th, 2010

Run by: Angelos Tzotsos

System: VirtualBox 3.2, 1Gig RAM, on OpenSUSE 11.2

Version: osgeo-live 4.0 rc6

Results: Pass with issues

The GRASS plugin could not load the data from the /hom/user/grassdata folder

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny amd64

Version: osgeo-live 4.0 rc9

Results: Pass with issues (GRASS plugin is broken)

QGIS Mapserver

Tests written for: QGIS Mapserver 1.0, osgeo-live 4.0
Test Description last updated: 2010-08-08

Steps

Start QGIS Mapserver from Web Services

Verify that a browser opens and shows a world map

Results from 2010-08-04

Run by: Pirmin Kalberer

System: KVM

Version: osgeo-live 4.0 rc6

Results: Pass

R

double click on the R Icon
at the command line, type demo(graphics) and hit return
follow the prompt and watch the target window for examples

If it is possible please add steps here to test the included geostats packages, they are both more interesting and more likely to have problems in the build. tx

e.g. something with r-cran-maps(.deb), gstat, sp, rgdal, or spgrass6 ?

#Load a library
library(sp)
#list the demos available
demo()
#Run the demo from the sp package
#This will step you through several examples of code and the resulting plots
demo(gallery)

Some examples to try here:

http://r-spatial.sourceforge.net/xtra/xtra.RHnw.html

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Pass

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny amd64

Version: osgeo-live 4.0 rc9

Results: Pass

SAGA

Tests written for: OSGeo LiveDVD 4.0

Start the program
Check if no errors occur during initialisation (messages text)
Run the steps in the quickstart guide

As an extra test, you could check whether saga_cmd works: run SAGA_MLB=/usr/lib/saga saga_cmd from a terminal. The list of modules should be given. There should be 45 modules.

Results from 2010-08-05

Run by: Johan VandeWauw

System: Virtualbox, 700Mb RAM, on xubuntu 10.4 base

Version: distribution version: eg: osgeo-live 4.0 rc6

Results: Pass

Sahana

Tests written for: OSGeo LiveDVD 4.0

Steps

The 4.0rc6 release installer broke. Please rerun the gisvm/trunk/install_sahana.sh script as root before testing.

follow the steps in the on-disc help page

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Fail

Didn't have permission to run Sahana even when running under SUDO

--see above comment: it's not there because the installer failed. (now fixed) --HB

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny amd64

Version: osgeo-live 4.0 rc9

Results: Pass

spatialite

Tests written for: spatialite 2.4, osgeo-live 4.0
Test Description last updated: 2010-08-08

Run the steps in the quickstart guide

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Mac Mini 2.0 Dual Core, 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Pass with issues

should read user/data/spatialite/regions.sqlite
sql query doesn't work with 'order by' qualifier

udig

Steps

open UDig

Verify you see a Welcome screen

Close the Welcome display. (Note if you don't close this display, then you can't load layers later on)
from the Layer menu, choose "Add..."
Choose Files from /home/user/data/udig-data/data-v1_2/
select bc_border.shp
you may also select others, for example all shp files starting with bc_
click OK

Verify you see Canadian British Columbia data

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base system Mac Mini 2.0 Dual Core 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Fail

uDig opened but test data directory was not present

Raised issues:

http://trac.osgeo.org/osgeo/ticket/621 fix symbolic link so udig-data is available
http://trac.osgeo.org/osgeo/ticket/622 fails to show geoserver wms

Results from 2010-08-06

Run by: H Bowman

System: Qemu+KVM, host amd64 debian/lenny

Version: osgeo-live 4.0 rc9

Results: Pass

fixed path in test instructs

Ushahidi

Tests written for: OSGeo LiveDVD 4.0

Steps

follow the steps in the on-disc help page

Add more test results below, most recent results at the top

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core, 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Pass

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny amd64

Version: osgeo-live 4.0 rc9

Results: Pass

Viking

Tests written for: OSGeo LiveDVD 4.0
Steps

Start it up from the Navigation and Maps menu
If you have a GPX file handy, File \u2192 Open
Layers \u2192 New Map Layer
pick OpenStreetMaps (Mapnik), [ok]
On the Layer Name list on the left side, right click on "Map" and Download Onscreen Maps
It should start to download street maps of lower Manhattan
Select Tools \u2192 Ruler from the menu
Click on the Brooklyn Bridge, then on Battery Park to get a distance and heading

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2 Gig RAM

Version: Osgeo-live 4.0 rc6

Results: ~~Fail~~

Viking opened but with no gpx 'handy' I could not verify that it worked

--that's not really a fail. --HB

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny amd64

Version: osgeo-live 4.0 rc9

Results: Pass

ZOO Project

Tests written for: .ZOO Project. 1.0.0, OSGeo LiveDVD 4.0
Steps

make sure that your Apache and GeoServer are running

Web Services \u2192 Start GeoServer (takes a few moments)

Click on "ZOO Project" icon from the bottom of the Web Services geospatial menu to have firefox load the Spatialtools demo page
select a feature from the displayed states then click on a spatialtools button to get the RawDataOutput result of processing displayed on the map

Results from 2010-08-03

Run by: Gérald Fenoy

System: VMWare Fusion, instance with 2Gig RAM and 2CPU

Version: distribution version: osgeo-live 4.0 rc6

Results: Pass

Results from 2010-08-03

Run by: Johan VandeWauw

System: Virtualbox, instance with 700Mb RAM

Version: distribution version: osgeo-live 4.0 rc6

Results: Pass after manual install - *if* geoserver started

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny amd64

Version: osgeo-live 4.0 rc9

Results: Pass with issues (would be nice if it launched geoserver for you)

zyGrib

Tests written for: OSGeo LiveDVD 4.0
Steps

click the magnifying glass 1:1 button on the toolbar to go to the world map
left-click drag a box over Europe
click the [] zoom button to the left of the 1:1 zoom button to zoom in to that box
click the power plug button on the right to check the server status
left-click drag an area of interest again
File \u2192 Download GRIB
click the [Download GRIB file] button in the lower-left, and save it.
You should now see a weather map
In the Data menu you can select different maps to look at (e.g. "cloud cover")
Click the rocketship button on the right end of the toolbar to see a 5 day animation of the forecast. Set speed, Play, etc.

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 Dual Core 2Gig RAM

Version: Osgeo-live 4.0 rc6

Results: Pass with issues

Could not connect to network so power plug failed. Could not retrieve network data

Results from 2010-08-18

Run by: H Bowman

System: Live DVD booted from ISO in a Qemu-KVM VM on Debian/Lenny amd64

Version: osgeo-live 4.0 rc9

Results: Pass

main documentation

Steps

Open Help by selecting he help icon (a yellow sign with a wombat)

Verify that the firefox web browser opens at file:///usr/local/share/livedvd-docs/index.thml

Verify that the browser opens with "Home", "Contents", "Contact and Support", "Tests", "Sponsors" tabs.

Click on the above tabs.

Verify the respective pages are opened.

Open the "Contents" tab

Verify that each project is mentioned.

Verify that the project version numbers matches version numbers here: http://spreadsheets.google.com/ccc?key=0Al9zh8DjmU_RdGIzd0VLLTBpQVJuNVlHMlBWSDhKLXc&hl=en_GB

Verify that when clicking on each project title, a description page is opened.

Install a link checker

sudo apt-get install linkchecker

Run the linkchecker against the installed docs:

linkchecker /usr/local/share/livedvd-docs/index.html 2>&1 | tee /var/log/osgeo-live/linkchecker.log

Verify there are not errors in the log file

Results from 2010-08-06

Run by: Myles Kenihan

System: Live DVD, Base System Mac Mini 2.0 dual core, 2Gig RAM

Version: osgeo-live 4.0 rc6

Results: Pass with issues

The following project listings had issues
52 degree North Web Processing Service not present in contents
Geopublisher should be listed as version 1.5 in contents ( it's 1.4 )
Geoserver 2.0.1 should read 2.0.2
Mapbender not present in contents
Octave mapping tools not present in contents

--disabled on purpose. --HB

Open Jump 1.3 should read 1.3.1
R Geostatistics 2.10.1 should read 2.11.1
SAFA GIS not present in contents
uDIG 1.2rc1 should read 1.2rc3
Zoo Project not present in contents

The apt-get command failed because I was not connected to a network ( I'm not supposed to be connected to a network, apparently ) and also I was asked for a SUDO password which is not provided.

--sudo password now in welcome message --HB

The linkchecker could thus not be run as I was unable to acquire it

Windows Installers

Steps

From a windows computer, or Virtual Machine, insert the LiveDVD.
Go to the WindowsInstallers directory on the LiveDVD

Verify the installers are the same version number as the rest of the DVD, as listed at http://spreadsheets.google.com/ccc?key=0Al9zh8DjmU_RdGIzd0VLLTBpQVJuNVlHMlBWSDhKLXc&hl=en_GB

For each WindowsInstaller, run the installer, using all defaults

Verify the application installs without errors

If sufficient time, Open up the application and run the test steps above for the application.

Results from 2010-08-19

Run by: H Bowman

System: Burned full DVD and Qemu-KVM

Version: 4.0rc9

Results: Pass with issues

/usr/local/share/ symlinks for both Mac and Windows installers are broken because /cdrom is a real file and not a symlink to /media/cdrom. Otherwise they seem to be correctly in place in the root dir of the DVD. This seems to be an Ubuntu 10.04 thing, only solution is to link to /cdrom instead of /media/cdrom in the install script.

Mac Installers

Steps

From a Mac, or Virtual Machine, insert the LiveDVD.
Go to the MacInstallers directory on the LiveDVD

Verify the installers are the same version number as the rest of the DVD, as listed at http://spreadsheets.google.com/ccc?key=0Al9zh8DjmU_RdGIzd0VLLTBpQVJuNVlHMlBWSDhKLXc&hl=en_GB

For each MacInstaller, run the installer, using all defaults

Verify the application installs without errors

If sufficient time, Open up the application and run the test steps above for the application.

Results from 2010-08-06

Run by: Myles Kenihan

System: Booted from Disk. Base System Mac Mini 2.0 Dual Core, 2 Gig RAM

Version: Arramagong Live GIS 3.0

Results: Pass with issues

Could not run directly from OSX Snow Leopard. Had to change system settings to boot from disk which worked fine.

Media tests

DVD testing

Steps:

Download full 4.3gb ISO
Burn to a DVD
Boot and play

Results:

Results from 2010-08-19

Run by: H Bowman
System: Quad-core PC amd64 4gb RAM
Version: 4.0rc9
Results: Pass (First one came out as a coaster, second one was ok)

USB testing

Steps:

Install a OSGeo Live image onto a USB as per: http://wiki.osgeo.org/wiki/Live_GIS_Disc_Quick_Start#Install_to_a_Live_USB_Stick
Boot the USB. Verify you can log into the OSGeo-Live Desktop
Open up one of the applications (preferably different to other USB testers), and verify it works fine as per test steps above.
Note any errors below. (Please state what size USB stick you used (4gb, 8gb, etc.) and how much free space was left for user files (`df -h`))

Results:

Test 1: First Last

Computer: Apple Mac ...

Version: osgeo-live 4.0rc7

Results: Pass, Fail, Pass with Issues

Issues: note here.

Test 2:

Computer: Gateway (Centrino) pretty old

Version: osgeo-live 4.0rc9

Results: Pass with Issues

Issues: hanging with "boot:" prompt, "live" and "debug" boot option end up with black screen, but "xforcevesa" works very well and resolution fits perfectly.

Test 3:

Computer: Acer Timeline

Version: osgeo-live 4.0rc9

Results: Pass

Issues: no issues

Test 4: Adrià Mercader

Computer: Dell Inspiron 1564 (Intel i5)

Version: osgeo-live 4.0rc9

Results: Pass

Issues: No issues

Test 5: Jody Garnett

Computer: Thinkpad T43

Version: osgeo-live 4.0rc9

Results: Pass

Issues: No issues (hold down F12 to get the bootlist to choose the usb)

Comment: Wow the experience is so much better - we have to do this :-)

Test 6: Jody Garnett

Computer: Macbook Pro

Version: osgeo-live 4.0rc9

Results: Fail

Issues: Unable to boot from usb, not formatted correctly for mac to boot from

Comment: Internet workarund says to use the DVD to boot the USB

Test 7: H Bowman

Computer: 4gb USB drive with full 4.3gb ISO

Version: osgeo-live 4.0rc9

Results: FAIL

Issues: When formated as FAT32 the avail size of the USB goes down to 3.7gb.

Comment: Make startup disk: "This device is not large enough to hold the image"

still unknown if Installers would be copied over too.

VM testing

Steps:

Download full or mini ISO
Create a VM (exact method will depend on the VM software used, see elsewhere in this wiki)
Boot and play

Results:

VirtualBox

Brian wrote: " running rc9 physical DVD in vbox to type this note"

VMWare

-

Qemu + KVM

Test version 4.0rc9
Tested by: H Bowman
Pass with issues
Host: Debian/Stable (Lenny) with qemu-kvm 0.12.3+dfsg-4~bpo50+2 from backports.org
Started with:

   kvm -cdrom osgeolive-4.0rc9.iso -m 1024 -cpu phenom

- All seems to be working, except for /usr/local/share/*Installers symlinks, which are broken because /cdrom is a real dir and not a symlink to /media/cdrom. See also /etc/mtab vs. /etc/fstab.

@@ Line 1: / Line 1: @@
+'''Depecated''': This page is not used any more. Instead we make use of Project Quickstarts for testing.
 ''This page describes how to test each application installed on the [[Live GIS Disc]]. Application test steps describe how an Ubuntu user who is unfamiliar an application can try it out and confirm that everything has been installed correctly within 5 minutes. Test Results document when the application was last verified to be working.''
 ''This page is maintained at: http://wiki.osgeo.org/wiki/Live_GIS_Disc_Testing and copied onto each release of the LiveDVD.''
-*Please try to move the app list into more of an alphabetical order ...
+* [[Live GIS Disc/Errata/4.0.0]]
+* [[Live GIS Disc/Errata/8.0]]
 = Package testing matrix  =
@@ Line 15: / Line 18: @@
 ! Notes
 |-
-| Boot and Installer
+| [[#Boot and Installer|Boot and Installer]]
 | 4.0rc6
 | &nbsp;&nbsp;{{issues}}&nbsp;&nbsp;
 |
 |-
-| deegree
+| [[#atlasstyler|atlasstyler]]
-| 4.0rc6
+| 4.0rc9
 | {{issues}}
 |
 |-
-| [[#atlasstyler|atlasstyler]]
+| [[#deegree|deegree]]
 | 4.0rc6
-| {{fail}}
+| {{issues}}
 |
 |-
-| geopublisher
+| [[#geopublisher|geopublisher]]
 | 4.0rc6
 | {{issues}}
 |
 |-
-| geoserver
+| [[#geoserver|geoserver]]
 | 4.0rc6
 | {{issues}}
 |
 |-
-| gvSIG
+| [[#gvSIG|gvSIG]]
 | 4.0rc6
 | {{issues}}
 |
 |-
-| GDAL / OGR
+| [[#gdal / ogr|GDAL / OGR]]
 | 4.0rc9
 | {{pass}}
@@ Line 51: / Line 54: @@
 |-
 | [[#geomajas|geomajas]]
-| 4.0rc6
+| 4.0rc9
-| {{fail}}
+| {{pass}}
-| simply suffers from the 'fails to wait for server to fully init before loading FF&nbsp;page' problem. Otherwise appears to be ok in rc9
+|
 |-
-| geonetwork
+| [[#geonetwork|geonetwork]]
 | 4.0rc6
 | {{issues}}
 |
 |-
-| gpsdrive
+| [[#gpsdrive|gpsdrive]]
 | 4.0rc9
 | {{pass}}
 |
 |-
-| geokettle
+| [[#geokettle|geokettle]]
 | 4.0rc6
 | {{pass}}
@@ Line 80: / Line 83: @@
 |
 |-
-| kosmo
+| [[#kosmo|kosmo]]
 | 4.0rc6
 | {{pass}}
 |
 |-
-| mapnik
+| [[#mapnik|mapnik]]
 | 4.0rc6
 | {{pass}}
@@ Line 105: / Line 108: @@
 |
 |-
-| [[#MapGuide Open Source|MapGuide Open Source]]
+| [[#MapGuide Open Source|MapGuide]]
 | 4.0rc6
 | {{issues}}
@@ Line 156: / Line 159: @@
 |-
 | [[#postgis|postgis]]
-| 4.0rc6
+| 4.0rc9
-| {{issues}}
+| {{pass}}
-| no quickstart, test from v3 =&gt; documentation errors; works fine
+|
 |-
 | [[#pgRouting|pgRouting]]
@@ Line 170: / Line 173: @@
 |
 |-
-| QGIS Mapserver
+| [[#QGIS Mapserver|QGIS Mapserver]]
 | 4.0rc6
 | {{Pass}}
@@ Line 220: / Line 223: @@
 |
 |-
-| main documentation
+| [[#main documentation|main documentation]]
 | 4.0rc6
 | {{issues}}
 |
 |-
-| Windows Installers
+| [[#Windows Installers|Windows Installers]]
 |
 | ''none''
 |
 |-
-| Mac Installers
+| [[#Mac Installers|Mac Installers]]
 |
 | ''none''
@@ Line 256: / Line 259: @@
 |-
 | VM:VirtualBox
+| 4.0rc9
+| {{pass}} ?
 |
-| ''none''
-| running rc9 physical DVD&nbsp;in vbox to type this note
 |-
 | VM:VMWare
@@ Line 432: / Line 435: @@
 = atlasstyler  =
-Run Quickstart
+# Go to Geospatial ‣ Desktop GIS ‣ AtlasStyler.
+# Use the import buttons to either add ESRI Shapefiles oder PostGIS datasources to your project.
-Quickstart:
+# Click the tool-icon in the layer legend and select style. The main AtlasStyler dialog will open. While you change the style, the ‘automatic preview’ option at the bottom will render your changes on the fly.
-* http://download.osgeo.org/livedvd/4.0-rc6/osgeolive-docs/quickstart/atlasstyler_quickstart.html
-----
 == Results from August 6th, 2010  ==
@@ Line 456: / Line 456: @@
 * figured out a workaround; clicking on task bar and asking the application to maximiz finally lets me get at the window tilebar
 * Whew was able to use "ps -ef | grep java" and "kill" to shut it down
+== Results from August 19th, 2010  ==
+:Run by: H Bowman
+:System: Qemu+KVM on Debian/lenny amd64 host
+:Version: osgeo-live 4.0 rc9
+:Results: {{issues}}
+* worked fine for me with natural_earth countries, I had to lock the mouse within the VM window (ctrl-alt in Qemu-KVM) so I could alt-left-click-drag the Style window up enough to get at the Ok green check button in the bottom right. Otherwise very nice.
+----
 = geopublisher  =
@@ Line 620: / Line 630: @@
 = geomajas  =
-*Click desktop icon "Start Geomajas" which will start the Geomajas startup script. This will in turn start up a Tomcat server.
+*Click desktop icon "Browser Clients" &rarr; "Start Geomajas" which will start the Geomajas startup script. This will in turn start up a Tomcat server.
-:Verify firefox opens a new tab at the page http://localhost:3420/geomajas-tutorial/applications/tutorial/html/
+:Verify that Firefox opens a new tab at the page http://localhost:3420/showcase/
+* ''Test instructions are out of date'' ...
+<strike>
 *Click on the "Start demo!" link for the Attributes &amp; Features demo.
@@ Line 631: / Line 643: @@
 :Verify that a floating window appears, showing the rows' contents in more detail.
+</strike>
-*Click on the desktop icon "Stop Geomajas".
+*Click on the desktop icon "Browser Clients" &rarr; "Stop Geomajas".
 :Verify that the Tomcat server that runs Geomajas has stopped.
@@ Line 661: / Line 674: @@
 *The link http://localhost:3420/geomajas-tutorial/applications/tutorial/html/ does not work after start-up
+== Results from 19 Aug 2010  ==
+:Run by: H Bowman
+:System: Qemu+KVM on a Debian/Lenny amd64 host
+:Version: distribution version: osgeo-live-3.0rc9
+:Results: {{Pass}}
+* Test instructions are all out of date, but playing around with the showcase/ all seems to work ok.
 = geonetwork  =
@@ Line 2,226: / Line 2,247: @@
 *Boot the USB. Verify you can log into the OSGeo-Live Desktop
 *Open up one of the applications (preferably different to other USB testers), and verify it works fine as per test steps above.
-*Note any errors below. ('''''Please state what size USB stick you used (4gb, 8gb, etc.)''''')
+*Note any errors below. ('''''Please state what size USB stick you used (4gb, 8gb, etc.) and how much free space was left for user files (`df -h`)''''')
 Results:
@@ Line 2,273: / Line 2,294: @@
 :Issues: Unable to boot from usb, not formatted correctly for mac to boot from
 :Comment: Internet workarund says to use the DVD to boot the USB
+*Test 7: H Bowman
+:Computer: 4gb USB drive with full 4.3gb ISO
+:Version: osgeo-live 4.0rc9
+:Results: {{Fail}}
+:Issues: When formated as FAT32 the avail size of the USB goes down to 3.7gb.
+:Comment: Make startup disk: "''This device is not large enough to hold the image''"
+:: still unknown if Installers would be copied over too.
 == VM testing  ==
@@ Line 2,286: / Line 2,316: @@
 === VirtualBox  ===
-*-
+* ''Brian wrote:'' " running rc9 physical DVD in vbox to type this note"
 === VMWare  ===

Difference between revisions of "Live GIS Disc Testing"

Latest revision as of 01:10, 23 August 2014

Package testing matrix

Template

Steps

Results from .date.

Boot and Installer

Steps

Results from August 6th

Results from August 7th, 2010

deegree

Results from August 6th

Results from August 6th

Results from August 7th, 2010

atlasstyler

Results from August 6th, 2010

Results from August 19th, 2010

geopublisher

Results from August 6th, 2010

geoserver

Results from August 6th,2010

Results from August 7th, 2010

gvSIG

Results from 6 Aug 2010

gdal / ogr

Results from August 7th, 2010

Results from 2010-08-18

geomajas

Results from 9 March 2010

Results from 6 Aug 2010

Results from August 8th, 2010

Results from 19 Aug 2010

geonetwork

Results from 10 August 2010

Results from August 8th, 2010

gpsdrive

Testing

If no GPS is plugged in

Downloading maps

Overlay a GPX track

If a GPS is plugged in

Results from Aug 2010

Results from 18 Aug 2010

geokettle

Results from August 8th, 2010

gmt

Results from 2010-08-06

Results from 2010-08-18

grass

Results from 2010-08-06

Results from 2010-08-18

kosmo

Results from 2010-08-10

mapnik

Results from 2010-08-06

maptiler

Results from 2010-08-19

marble

Results from 2010-08-06

Results from 2010-08-18

mapfish

Results from August 8th, 2010

MapGuide Open Source

Results from August 5, 2010

Results from 6 Aug 2010

Mapbender

Results from 5.7.2010

test results from 23.7.2010

test results from 8.8.2010

mb-system

Results from 2010-08-06

Results from 2010-08-18

mapserver

Results from 2010-08-06

Results from 2010-08-06

Results from August 7th, 2010

octave

Results from 2010-08-06

Results from 2010-08-18

opencpn