Building fully open climatic monitoring system
Revision as of 04:55, 15 November 2016 by Lucadelu (talk | contribs) (→Participants: add new participant)
OSGeo's Open Monitoring System WG hackathon
This event will be held in Italy, in San Michele all'Adige at Fondazione Edmund Mach OSM. The event is a workshop to learn how to create a open climatic monitoring system. The dates are 6th and 7th December 2016.
Program
Day 1
- 09:00 Introduction, Open Software and Open Hardware (Talk)
- 10:00 introduction to OGC Sensor Observation Service with istSOS (Talk)
- 10:30 coffee break
- 11:00 Arduino hands on: blink and temperature, temperature and humidity, other sensors like CO2 (Hands on)
- 12:30 Lunch
- 13.30 Arduino IDE: troubleshooting, compiling (Talk+hands-on)
- 14:00 Introduction to weather station (Talk)
- 14:30 Discover weather station components (Hands on)
- 15:00 coffee break
- 15:30 Building weather station (Hands on)
- 17:30 end
Day 2
- 09:00 Soldering workshop (Hands on)
- 10:00 Prototyping your own sensor system and introduce arduino enslaved to raspberrypi (Talk)
- 10:30 coffee break
- 11:00 Prototyping your own sensor system and introduce arduino enslaved to raspberrypi (Hands on)
- 12:30 Introduction about communication: GSM, Wifi, RF, USB (Talk)
- 13:00 Lunch
- 14:00 Connecting to istSOS for data management, analysis and distribution
- 15:30 coffee break
- 16:00 Connecting to istSOS for data management, analysis and distribution (cont.)
- 17:00 end
Components to bring
To follow completely the hackathon everyone need to come with the following components
Required
Material:
- arduino nano v3 with soldered pins
- weather components:
- EITHER:
- Arduino Uno R3 - SparkFun Weather Shield DEV-12081 - Arduino Stackable Header Kit - R3PRT-11417 - GPS Receiver - GP-735 (56 Channel) GPS-13670 - JST SH Jumper 6 Wire - 1.75" GPS-00574 - RJ11 6-Pin Connector PRT-00132
- OR:
- OurWeather station complete kit
- leds
- some sensors (DS18B20 or DHT22 or gas)
- some jumper wires/cable
Suggested
- raspberry pi with raspbian OS
- arduino nano v3 non soldered with separated headers
- arduino shield for communication (GSM, Wifi, RF)
- arduino data logger shield OpenLog (Banggood)
- Weather Meters SEN-08942 (this come with OurWeather)
- solder iron
- soldering led
Participants
The maximum number of participant is 20 people.
| Number | Name | Arrival date | Departure date | Affiliation | Your own sensors | Note |
|---|---|---|---|---|---|---|
| 1 | Luca Delucchi | - | - | Fondazione E. Mach | ||
| 2 | Robero Zorer | - | - | Fondazione E. Mach | ||
| 3 | Massimiliano Cannata | - | - | SUPSI | ||
| 4 | Daniele Strigaro | - | - | SUPSI | ||
| 5 | Milan Antonovic | - | - | SUPSI | ||
| 6 | Mirko Cardoso | - | - | SUPSI | ||
| 7 | Yann Chemin | - | - | Freelance | ||
| 8 | Ilaria Ferrando | - | - | UNIGE | ||
| 9 | Ivan Piffer | - | - | Fondazione E. Mach | ||
| 10 | Francesca Cagnacci | - | - | Fondazione E. Mach | ||
| 11 | Federico Ossi | - | - | Fondazione E. Mach | ||
| 12 | Martina Costi | - | - | Università di Trento | ||
| 13 | Clara Tattoni | - | - | FEM/Unitn | ||
| 14 | Nikos Alexandris | - | - | Freelancer | ||
| 15 | Antonio Galea | - | - | Freelancer | ||
| 16 | Alessandro Stefani | - | - | |||
| 17 | Paolo Lenti | - | - | Fondazione E. Mach | ||
| ADD | YOUR | SELF |
Sponsors
- Fondazione Edmund Mach, providing logistic support and organization effort