Difference between revisions of "TelaScience/Machines/HyperCube"

From OSGeo
Jump to navigation Jump to search
(add crschmidts notes on rebooting.)
 
(33 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
HyperCube is a debian etch machine, hosted at TelaScience, which is to be used for the Geodata repository and related tasks.
+
HyperCube (aka http://hypercube.telascience.org) is a debian etch machine, hosted at TelaScience, which is to be used for the Geodata repository and related tasks.
  
 
Currently, there is a second machine serving geodata related tasks: geodata.telascience.org, aka xblade11-2. Hopefully, we will be able to migrate from geodata to hypercube.
 
Currently, there is a second machine serving geodata related tasks: geodata.telascience.org, aka xblade11-2. Hopefully, we will be able to migrate from geodata to hypercube.
Line 7: Line 7:
 
Data on HyperCube's local disk is not, at the moment, backed up or running under RAID. If your data is important, please keep a backup or keep it in SVN somewhere.
 
Data on HyperCube's local disk is not, at the moment, backed up or running under RAID. If your data is important, please keep a backup or keep it in SVN somewhere.
  
 +
== Current Uses ==
 +
* OpenAerialMap main server
 +
** Tiles hosted on agami
 +
** data hosted on optistor
 +
* Landsat7 dataset serving
 +
** data hosted on optistor
 +
* OpenStreetMap "t@h" distributed tile rendering project
 +
 +
== Storage ==
 +
/mnt/geodata is a 1.8T partition for geodata storage.
 +
/mnt/agami is a 2.6T partition for geodata storage
 +
 +
HyperCube is connected to several different NFS mounts.
 +
 +
* Agami: [[TelaScience/NFS/Agami]]
 +
* Geothumper: [[TelaScience/NFS/GeoThumper]]
 +
* Optistor [[TelaScience/NFS/Optistor]]
 +
 +
== Admin Notes For Reboot ==
 +
 +
When restarting hypercube:
 +
* Disable the raid bios read
 +
* in the bios as pci slot config
 +
* It's listed as ZCR
  
 
== Activity Log ==
 
== Activity Log ==
 +
 +
The activity log below is all very old.
 +
 +
* sudo apt-get install libwww-perl [[User:Crschmidt|Crschmidt]] 21:48, 7 April 2007 (CEST)
 
* sudo apt-get install libgdal-doc libgdal1-1.3.2 libgdal1-1.3.2-grass python-gdal gdal-bin  , markusN MODIS processing [[User:Crschmidt|Crschmidt]] 21:07, 7 April 2007 (CEST)
 
* sudo apt-get install libgdal-doc libgdal1-1.3.2 libgdal1-1.3.2-grass python-gdal gdal-bin  , markusN MODIS processing [[User:Crschmidt|Crschmidt]] 21:07, 7 April 2007 (CEST)
 
* Created 'osgeo' group, added crschmidt, sderle, johng [[User:Crschmidt|Crschmidt]] 21:03, 7 April 2007 (CEST)
 
* Created 'osgeo' group, added crschmidt, sderle, johng [[User:Crschmidt|Crschmidt]] 21:03, 7 April 2007 (CEST)
Line 15: Line 43:
 
* Disabled apparently unnecessary services openbsd-inetd, cupsys, netatalk, winbind for security purposes [[User:SchuylerErle|SchuylerErle]] 21:14 CEST
 
* Disabled apparently unnecessary services openbsd-inetd, cupsys, netatalk, winbind for security purposes [[User:SchuylerErle|SchuylerErle]] 21:14 CEST
 
* Replaced exim4 with postfix [[User:SchuylerErle|SchuylerErle]] 21:14 CEST
 
* Replaced exim4 with postfix [[User:SchuylerErle|SchuylerErle]] 21:14 CEST
 +
* Installed Debian build tools (build-essential, devscripts, etc.) [[User:SchuylerErle|SchuylerErle]] 21:57 CEST
 +
* Rebuilt and installed GDAL 1.4.0 using D-GIS packaging files. Had to change libcurl4 dependency to libcurl3. Source packages can be found in /usr/local/src. [[User:SchuylerErle|SchuylerErle]] 21:57 CEST
 +
* Rebuilt and installed GRASS 6.2.1 (and gdal-grass 1.4.0) using D-GIS packaging files. Source packages can be found in /usr/local/src. [[User:SchuylerErle|SchuylerErle]] 22:27 CEST
 +
* Rebuilt and installed Mapnik 0.4.0 from Debian Sid sources. Source packages can be found in /usr/local/src. [[User:SchuylerErle|SchuylerErle]] 22:27 CEST
 +
* Rebuilt and installed MapServer 4.10.1 using D-GIS packaging files. Source packages can be found in /usr/local/src. [[User:SchuylerErle|SchuylerErle]] 22:58 CEST
 +
* Rebuilt and installed libgeotiff 1.2.3 using D-GIS sources. See /usr/local/src. [[User:SchuylerErle|SchuylerErle]] 03:56, 8 Apr 2007 CEST
 +
* apt-get install openmpi-* per request of HJG & NHV [[User:SchuylerErle|SchuylerErle]] 03:56, 8 Apr 2007 CEST
 +
* Built and installed Debian package of TileCache from project SVN trunk revision 52. [[User:SchuylerErle|SchuylerErle]] 04:19, 8 Apr 2007 CEST
 +
* Built and installed OSSIM from project SVN trunk [[User:Nhv|NormanVine]] Sat Apr  7 18:42:24 PDT 2007
 +
** Installed to /usr/local
 +
* Installed ossim_preferences in /usr/local/etc [[User:johng|HyperJohnGraham]] Sat Apr  7 18:58:24 PDT 2007
 +
* Installed egm96.grd in /mnt/agami/elevation/geoids/geoid1996 [[User:johng|HyperJohnGraham]] Sat Apr  7 19:02:00 PDT 2007
 +
* Add /tiles URL setup: points to TileCache. This will be true for all subdomains. To add tilecache layers, edit /etc/tilecache.cfg and restart Apache.
 +
** TileCache caches to /mnt/agami/tilecache/
 +
* Installed CGIAR SRTM V3 in /mnt/agami/elevation/cgiar_srtm_v3 [[User:johng|HyperJohnGraham]]
 +
* After installing phppgadmin via apt: [[User:Crschmidt|Crschmidt]] 01:40, 9 April 2007 (CEST)
 +
** Copy /etc/apache/conf.d/phppgadmin to /etc/apache2/sites-available/phppgadmin
 +
** ln -s /etc/apache2/sites-available/phppgadmin /etc/apache2/sites-enabled/phppgadmin
 +
** apt-get install php5-pg
 +
** restart apache
 +
* Installed bind9 in default local caching configuration. Changed /etc/resolv.conf to point to localhost. [[User:SchuylerErle|SchuylerErle]] 00:18 GMT 1 May 2007
 +
* Added user account 'brandon' for Brandon Martin-Anderson, who I hope will be helping get TIGER into OSM. [[User:SchuylerErle|SchuylerErle]] Wed Jun 13 07:22:43 EDT 2007
 +
 +
[[Category:Public Geospatial Data Committee]]
 +
[[Category: Infrastructure]]

Latest revision as of 21:16, 19 January 2010

HyperCube (aka http://hypercube.telascience.org) is a debian etch machine, hosted at TelaScience, which is to be used for the Geodata repository and related tasks.

Currently, there is a second machine serving geodata related tasks: geodata.telascience.org, aka xblade11-2. Hopefully, we will be able to migrate from geodata to hypercube.

Any changes made to the machine -- software installed, changes to config files, etc. -- should be recorded here so that the machine is in a state which can be reproduced if it fails.

Data on HyperCube's local disk is not, at the moment, backed up or running under RAID. If your data is important, please keep a backup or keep it in SVN somewhere.

Current Uses

  • OpenAerialMap main server
    • Tiles hosted on agami
    • data hosted on optistor
  • Landsat7 dataset serving
    • data hosted on optistor
  • OpenStreetMap "t@h" distributed tile rendering project

Storage

/mnt/geodata is a 1.8T partition for geodata storage. /mnt/agami is a 2.6T partition for geodata storage

HyperCube is connected to several different NFS mounts.

Admin Notes For Reboot

When restarting hypercube:

  • Disable the raid bios read
  • in the bios as pci slot config
  • It's listed as ZCR

Activity Log

The activity log below is all very old.

  • sudo apt-get install libwww-perl Crschmidt 21:48, 7 April 2007 (CEST)
  • sudo apt-get install libgdal-doc libgdal1-1.3.2 libgdal1-1.3.2-grass python-gdal gdal-bin , markusN MODIS processing Crschmidt 21:07, 7 April 2007 (CEST)
  • Created 'osgeo' group, added crschmidt, sderle, johng Crschmidt 21:03, 7 April 2007 (CEST)
  • Created sderle user for Schuyler Erle Crschmidt 21:03, 7 April 2007 (CEST)
  • Edited /etc/motd to reference this wiki page Crschmidt 21:00, 7 April 2007 (CEST)
  • Disabled apparently unnecessary services openbsd-inetd, cupsys, netatalk, winbind for security purposes SchuylerErle 21:14 CEST
  • Replaced exim4 with postfix SchuylerErle 21:14 CEST
  • Installed Debian build tools (build-essential, devscripts, etc.) SchuylerErle 21:57 CEST
  • Rebuilt and installed GDAL 1.4.0 using D-GIS packaging files. Had to change libcurl4 dependency to libcurl3. Source packages can be found in /usr/local/src. SchuylerErle 21:57 CEST
  • Rebuilt and installed GRASS 6.2.1 (and gdal-grass 1.4.0) using D-GIS packaging files. Source packages can be found in /usr/local/src. SchuylerErle 22:27 CEST
  • Rebuilt and installed Mapnik 0.4.0 from Debian Sid sources. Source packages can be found in /usr/local/src. SchuylerErle 22:27 CEST
  • Rebuilt and installed MapServer 4.10.1 using D-GIS packaging files. Source packages can be found in /usr/local/src. SchuylerErle 22:58 CEST
  • Rebuilt and installed libgeotiff 1.2.3 using D-GIS sources. See /usr/local/src. SchuylerErle 03:56, 8 Apr 2007 CEST
  • apt-get install openmpi-* per request of HJG & NHV SchuylerErle 03:56, 8 Apr 2007 CEST
  • Built and installed Debian package of TileCache from project SVN trunk revision 52. SchuylerErle 04:19, 8 Apr 2007 CEST
  • Built and installed OSSIM from project SVN trunk NormanVine Sat Apr 7 18:42:24 PDT 2007
    • Installed to /usr/local
  • Installed ossim_preferences in /usr/local/etc HyperJohnGraham Sat Apr 7 18:58:24 PDT 2007
  • Installed egm96.grd in /mnt/agami/elevation/geoids/geoid1996 HyperJohnGraham Sat Apr 7 19:02:00 PDT 2007
  • Add /tiles URL setup: points to TileCache. This will be true for all subdomains. To add tilecache layers, edit /etc/tilecache.cfg and restart Apache.
    • TileCache caches to /mnt/agami/tilecache/
  • Installed CGIAR SRTM V3 in /mnt/agami/elevation/cgiar_srtm_v3 HyperJohnGraham
  • After installing phppgadmin via apt: Crschmidt 01:40, 9 April 2007 (CEST)
    • Copy /etc/apache/conf.d/phppgadmin to /etc/apache2/sites-available/phppgadmin
    • ln -s /etc/apache2/sites-available/phppgadmin /etc/apache2/sites-enabled/phppgadmin
    • apt-get install php5-pg
    • restart apache
  • Installed bind9 in default local caching configuration. Changed /etc/resolv.conf to point to localhost. SchuylerErle 00:18 GMT 1 May 2007
  • Added user account 'brandon' for Brandon Martin-Anderson, who I hope will be helping get TIGER into OSM. SchuylerErle Wed Jun 13 07:22:43 EDT 2007
Retrieved from "http://wiki.osgeo.org/w/index.php?title=TelaScience/Machines/HyperCube&oldid=44452"