Difference between revisions of "Osgeo9"

From OSGeo
Jump to navigation Jump to search
(Created page with "'''Osgeo9''' is an Ubuntu 20.04 LTS machine administered by SAC, hosted on OSU OSL servers since April 2021. Donated to OSGeo by Open...")
 
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
'''Osgeo9''' is an Ubuntu 20.04 LTS machine administered by [[SAC]], hosted on [[SAC_Service_Status#Servers_at_OSL|OSU OSL servers]] since April 2021.
+
'''Osgeo9''' is an Ubuntu 22.04.1 LTS machine administered by [[SAC]], hosted on [[SAC_Service_Status#Servers_at_OSL|OSU OSL servers]] since April 2021.
 
Donated to OSGeo by OpenStreetMap Foundation (OSMF)
 
Donated to OSGeo by OpenStreetMap Foundation (OSMF)
  
Line 5: Line 5:
  
 
== Hardware ==
 
== Hardware ==
This will be an LXD host
+
This is an LXD host
IPv4 address..: 140.211.15.13, (OpenVPN KVM IP: osgeo9.osuosl.oob [10.0.0.108])
+
<pre>
Hostname......: osgeo9.osgeo.osuosl.org
+
IPv4 address..: 140.211.15.13, (OpenVPN KVM IP: osgeo9.osuosl.oob [10.0.0.108])
LSB Specs.........:  Ubuntu 20.04.2
+
Hostname......: osgeo9.osgeo.osuosl.org
RAM...........: 70 Gi
+
LSB Specs.........:  Ubuntu 20.04.2
Disk..........:  
+
RAM...........: 70 Gi
 +
Disk..........:  
  
tech_dev@osgeo8:~$ sudo lsblk
+
tech_dev@osgeo8:~$ sudo lsblk
NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 
sda            8:0    0  410G  0 disk
 
├─sda1        8:1    0    1M  0 part
 
├─sda2        8:2    0  488M  0 part /boot
 
└─sda3        8:3    0 409.5G  0 part
 
  ├─lvm-swap 253:0    0  1.9G  0 lvm  [SWAP]
 
  └─lvm-root 253:1    0    10G  0 lvm  /
 
  
 +
NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINTS
 +
loop0          7:0    0  63.2M  1 loop /snap/core20/1695
 +
loop1          7:1    0  55.6M  1 loop /snap/core18/2566
 +
loop2          7:2    0  55.6M  1 loop /snap/core18/2620
 +
loop3          7:3    0  63.2M  1 loop
 +
loop4          7:4    0 136.4M  1 loop /snap/lxd/23889
 +
loop5          7:5    0 135.7M  1 loop
 +
loop6          7:6    0 136.5M  1 loop /snap/lxd/23853
 +
loop7          7:7    0    48M  1 loop /snap/snapd/17029
 +
loop8          7:8    0    48M  1 loop /snap/snapd/17336
 +
loop9          7:9    0  63.2M  1 loop /snap/core20/1634
 +
sda            8:0    0  6.5T  0 disk
 +
├─sda1        8:1    0    1M  0 part
 +
├─sda2        8:2    0  488M  0 part /boot
 +
└─sda3        8:3    0  6.5T  0 part
 +
  ├─lvm-swap 253:0    0  1.9G  0 lvm  [SWAP]
 +
  ├─lvm-root 253:1    0  210G  0 lvm  /
 +
  └─lvm-lxd  253:2    0  2.9T  0 lvm
  
 +
</pre>
 
Cpus..........: 2 processors (24 cores)  (Intel(R) Xeon(R) CPU X5660  @ 2.80GHz, 12288 KB cache)
 
Cpus..........: 2 processors (24 cores)  (Intel(R) Xeon(R) CPU X5660  @ 2.80GHz, 12288 KB cache)
  
 +
== Setup ==
  
== Setup ==
+
2022-10-20 - new HDD 8 1.2TB drives were put in and old drives swapped out for a total of 6.5TB on RAID 6 usable space.
As of 2021-05-01 the ssh port of the main host (the physical server) is 2222 and there is only one non-root account on it
+
 
 +
As of 2021-10-04 the ssh port of the main host (the physical server) is 2222 and there is only one non-root account on it
 
and can only be accessed via key access. Keys are deployed using [[AnsibleDeployment]] repo of gitea
 
and can only be accessed via key access. Keys are deployed using [[AnsibleDeployment]] repo of gitea
 +
 +
It has an LXD installed from snap: Refer to [[SAC Service Status#osgeo_9]] for list of containers on it. It is also used for building lxd images.
 +
  
 
So to SSH - ssh tech_dev@osgeo9.osgeo.osuosl.org -p 2222
 
So to SSH - ssh tech_dev@osgeo9.osgeo.osuosl.org -p 2222

Latest revision as of 13:25, 7 November 2022

Osgeo9 is an Ubuntu 22.04.1 LTS machine administered by SAC, hosted on OSU OSL servers since April 2021. Donated to OSGeo by OpenStreetMap Foundation (OSMF)

Up-to-date info about containers can be found (password-protected) in https://git.osgeo.org/gitea/sac/osgeo9/wiki/

Hardware

This is an LXD host

	IPv4 address..: 140.211.15.13, (OpenVPN KVM IP: osgeo9.osuosl.oob [10.0.0.108])
	Hostname......: osgeo9.osgeo.osuosl.org
	LSB Specs.........:  Ubuntu 20.04.2
	RAM...........: 70 Gi
	Disk..........: 

	tech_dev@osgeo8:~$ sudo lsblk

	NAME         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
	loop0          7:0    0  63.2M  1 loop /snap/core20/1695
	loop1          7:1    0  55.6M  1 loop /snap/core18/2566
	loop2          7:2    0  55.6M  1 loop /snap/core18/2620
	loop3          7:3    0  63.2M  1 loop
	loop4          7:4    0 136.4M  1 loop /snap/lxd/23889
	loop5          7:5    0 135.7M  1 loop
	loop6          7:6    0 136.5M  1 loop /snap/lxd/23853
	loop7          7:7    0    48M  1 loop /snap/snapd/17029
	loop8          7:8    0    48M  1 loop /snap/snapd/17336
	loop9          7:9    0  63.2M  1 loop /snap/core20/1634
	sda            8:0    0   6.5T  0 disk
	├─sda1         8:1    0     1M  0 part
	├─sda2         8:2    0   488M  0 part /boot
	└─sda3         8:3    0   6.5T  0 part
	  ├─lvm-swap 253:0    0   1.9G  0 lvm  [SWAP]
	  ├─lvm-root 253:1    0   210G  0 lvm  /
	  └─lvm-lxd  253:2    0   2.9T  0 lvm

Cpus..........: 2 processors (24 cores) (Intel(R) Xeon(R) CPU X5660 @ 2.80GHz, 12288 KB cache)

Setup

2022-10-20 - new HDD 8 1.2TB drives were put in and old drives swapped out for a total of 6.5TB on RAID 6 usable space.

As of 2021-10-04 the ssh port of the main host (the physical server) is 2222 and there is only one non-root account on it and can only be accessed via key access. Keys are deployed using AnsibleDeployment repo of gitea

It has an LXD installed from snap: Refer to SAC Service Status#osgeo_9 for list of containers on it. It is also used for building lxd images.


So to SSH - ssh tech_dev@osgeo9.osgeo.osuosl.org -p 2222

As of 2021-05-01 some configurations of this machine are deployed using AnsibleDeployment


Containers and Services

Refer to SAC Service Status#osgeo_9