Difference between revisions of "Osgeo3"
| (One intermediate revision by the same user not shown) | |||
| Line 13: | Line 13: | ||
| Memory || 48 GB | | Memory || 48 GB | ||
|- | |- | ||
| − | | | + | | Processors ||2 Intel(R) Xeon(R) CPU E5540 @ 2.53GHz (8192kb cache) (each processor has 4 cores for total of 8 cpus) |
|} | |} | ||
<pre>lsblk -i | <pre>lsblk -i | ||
| Line 44: | Line 44: | ||
sda (composed of 2 1.8TB disks) is under hardware RAID1 - root lvm partition is 800GB, 1TB unallocated for future use | sda (composed of 2 1.8TB disks) is under hardware RAID1 - root lvm partition is 800GB, 1TB unallocated for future use | ||
</pre> | </pre> | ||
| − | |||
== Setup == | == Setup == | ||
| Line 53: | Line 52: | ||
So to SSH - ssh tech_dev@osgeo3.osgeo.osuosl.org -p 2222 | So to SSH - ssh tech_dev@osgeo3.osgeo.osuosl.org -p 2222 | ||
| + | |||
| + | It has 2 public ips: | ||
| + | |||
| + | * 140.211.15.26 ( osgeo3.osgeo.osuosl.org ) = not currently mapped to anything aside from 2222 ssh) planned for disaster should say osgeo7 go down and all need to be remapped | ||
| + | * 140.211.15.6 web-osgeo3.osgeo.osuosl.org | ||
For console access, you need to have OpenVPN installed and vpn config for OSUOSL. | For console access, you need to have OpenVPN installed and vpn config for OSUOSL. | ||
Once connected it can be accessed via: | Once connected it can be accessed via: | ||
| + | ``` | ||
| + | apt install ipmitool | ||
| + | ipmitool -I lanplus -H osgeo3.osuosl.oob -U tech_dev -P passwordhere sol activate | ||
| + | ``` | ||
| + | or web interface: | ||
| + | http://osgeo3.osuosl.oob | ||
Some configurations of this machine are deployed using [[AnsibleDeployment]] | Some configurations of this machine are deployed using [[AnsibleDeployment]] | ||
| + | It was upgraded in 2021 from Ubuntu 18 to Ubuntu 20.04. | ||
* Ubuntu [http://releases.ubuntu.com/20.04/ 20.04] [https://wiki.ubuntu.com/BionicBeaver/ReleaseNotes (Release Notes)]. [https://git.osgeo.org/gitea/sac/osgeo3 more details about install steps] | * Ubuntu [http://releases.ubuntu.com/20.04/ 20.04] [https://wiki.ubuntu.com/BionicBeaver/ReleaseNotes (Release Notes)]. [https://git.osgeo.org/gitea/sac/osgeo3 more details about install steps] | ||
Latest revision as of 14:44, 9 February 2022
Osgeo3 is an Ubuntu 20.04 LTS machine administered by SAC, hosted on OSU OSL servers for a long time. It in the past was running Ganeti, but was reformatted in March 2020, had fresh new disks put in and LXD installed for managing containers.
Up-to-date info about containers can be found (password-protected) in https://git.osgeo.org/gitea/sac/osgeo9/wiki/
Hardware
It's makeup is as follows:
| Item | Settings |
|---|---|
| Disks | 6 1.8 TB drives |
| Memory | 48 GB |
| Processors | 2 Intel(R) Xeon(R) CPU E5540 @ 2.53GHz (8192kb cache) (each processor has 4 cores for total of 8 cpus) |
lsblk -i NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT loop0 7:0 0 91.4M 1 loop /snap/core/8689 loop1 7:1 0 67M 1 loop /snap/lxd/13901 sda 8:0 0 1.8T 0 disk |-sda1 8:1 0 953M 0 part /boot `-sda2 8:2 0 1.8T 0 part |-osgeo3-root 253:0 0 800G 0 lvm / `-osgeo3-swap 253:1 0 32G 0 lvm [SWAP] sdb 8:16 0 1.8T 0 disk |-sdb1 8:17 0 1.8T 0 part `-sdb9 8:25 0 8M 0 part sdc 8:32 0 1.8T 0 disk |-sdc1 8:33 0 1.8T 0 part `-sdc9 8:41 0 8M 0 part sdd 8:48 0 1.8T 0 disk |-sdd1 8:49 0 1.8T 0 part `-sdd9 8:57 0 8M 0 part sde 8:64 0 1.8T 0 disk |-sde1 8:65 0 1.8T 0 part `-sde9 8:73 0 8M 0 part sr0 11:0 1 1024M 0 rom
sdb,sdc,sdd,sdd form a zfs osgeo3_lxd partition (sdb,sdc) mirrors sdd,sdf for total lxd capacity of 3.62 TB sda (composed of 2 1.8TB disks) is under hardware RAID1 - root lvm partition is 800GB, 1TB unallocated for future use
Setup
As of 2021-03 the ssh port of the main host (the physical server) is 2222 and there is only one non-root account on it and can only be accessed via key access. Keys are deployed using AnsibleDeployment repo of gitea
It has an LXD installed from snap.
So to SSH - ssh tech_dev@osgeo3.osgeo.osuosl.org -p 2222
It has 2 public ips:
- 140.211.15.26 ( osgeo3.osgeo.osuosl.org ) = not currently mapped to anything aside from 2222 ssh) planned for disaster should say osgeo7 go down and all need to be remapped
- 140.211.15.6 web-osgeo3.osgeo.osuosl.org
For console access, you need to have OpenVPN installed and vpn config for OSUOSL. Once connected it can be accessed via:
``` apt install ipmitool ipmitool -I lanplus -H osgeo3.osuosl.oob -U tech_dev -P passwordhere sol activate ``` or web interface:
Some configurations of this machine are deployed using AnsibleDeployment It was upgraded in 2021 from Ubuntu 18 to Ubuntu 20.04.
Containers and Services
Refer to SAC Service Status#osgeo_3